Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Houston?
Metal roof installation in Houston typically runs $15,000 to $40,000 for a standard single-family home, with most homeowners landing around $22,000 to $28,000 for standing seam steel. The spread comes down to roof size, metal type, and whether your existing roof needs a full tear-off. You’ll get a written price before any work starts, so the number on the estimate is the number you pay.
Houston’s humidity, heavy rain, and hurricane season make metal a practical choice here, not just an aesthetic one. It handles the climate better than asphalt shingles in the long run, and the upfront cost reflects that longevity. Here’s the full breakdown.
Metal Roof Installation Cost Breakdown (2026)
Here’s what a metal roof actually costs in the Houston market as of 2026, broken down by line item:
- Standing seam steel (26-gauge): $9.50 – $14.00 per square foot installed
- Standing seam aluminum: $10.50 – $15.50 per square foot installed
- Stone-coated steel shingles: $8.00 – $12.50 per square foot installed
- Corrugated metal panels (exposed fastener): $6.50 – $9.50 per square foot installed
- Tear-off and disposal of existing roof: $2,000 – $4,500 depending on layers
- Underlayment and battens: $1,200 – $2,800 for a typical 2,000 sq ft roof
- Flashing, vents, and edge trim: $900 – $2,200
For a 2,000-square-foot roof, that puts most standing seam installations between $19,000 and $31,000 before tear-off. Homes with complex roof geometry, multiple valleys, steep pitches, or in neighborhoods like The Heights, West University, and Memorial with older structures tend to run higher on labor.
Key takeaways:
- Plan on $15,000 – $40,000 for a complete metal roof in Houston, with standing seam at the higher end
- Stone-coated steel gives you the metal durability with a traditional shingle profile at a mid-range price
- Tear-off adds $2,000 – $4,500 if you’re not doing a roof-over
- Houston’s hail and high-wind exposure means you want 26-gauge minimum, not the thinner 29-gauge
What Affects Metal Roof Installation Pricing in Houston
- Roof size and pitch. A 1,200 sq ft ranch in Katy runs far less than a 3,500 sq ft two-story in Cinco Ranch. Steep pitches slow installation and add labor hours and safety costs.
- Metal type and gauge. Standing seam aluminum handles Houston’s salt-adjacent air better near Galveston Bay, but costs more than steel. 26-gauge steel is the standard; 24-gauge is heavier and pricier but handles hail better.
- Tear-off versus roof-over. Houston code allows a roof-over in many cases if there’s only one layer of shingles underneath, but we rarely recommend it. Tear-off lets the crew inspect the decking for rot, which is common in Houston’s damp attic conditions.
- Roof complexity. Valleys, dormers, skylights, and chimney flashing all add labor. Homes in neighborhoods like Montrose and Bellaire with older, irregular rooflines see higher per-square rates than a simple gable roof in Cypress.
- Permit and code requirements. Houston requires re-roofing permits, and wind-load requirements in Harris County mean fastening patterns that exceed what some cheaper installers use. That’s a cost that protects you, not one to skip.
- Seasonal timing. Houston’s hurricane season (June through November) pushes demand up after spring hail events. Winter and early spring tend to price lower and have better crew availability.
How to Save on Metal Roof Installation
You don’t save by going cheap on gauge or fastening. Houston wind and hail will find the corners that got cut. You save by being smart about scope and timing.
Get three written estimates, but read the line items. Some Houston roofers quote a low number and exclude tear-off, underlayment upgrades, or the permit. Bradford Remodeling Co Houston puts every line in writing before work starts, so there’s no door-day surprise.
Schedule in the off-season. February and March, before the spring storm cycle kicks up, often mean better pricing and faster scheduling in Houston.
Choose the right metal for your neighborhood. If you’re in a newer build in Sienna or Bridgeland, stone-coated steel gives you durability at $8 to $12.50 per square foot. If you’re in a historic district in The Heights, standing seam is often the required look, and it’s worth the premium for resale.
Check the warranty math. A metal roof with a substrate inspection and written workmanship guarantee outlasts two or even three asphalt replacements. Run the number by year, not by check at closing.
Call (940) 289-7658 for a free estimate. The number you get in writing is the number you pay, and it includes the 365-Day Done Right Promise on the completed installation.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost per square foot in Houston?
Metal roof installation in Houston ranges from $6.50 to $15.50 per square foot installed, depending on the system. Exposed-fastener corrugated panels sit at the low end around $6.50 to $9.50 per square foot, while standing seam aluminum runs $10.50 to $15.50 per square foot. That includes materials, labor, underlayment, and flashing. Call (940) 289-7658 for a written, line-item quote on your specific roof.
Is metal roofing worth the extra cost in Houston?
In Houston, a $15,000 to $40,000 metal roof typically outlasts two to three asphalt shingle roofs, which run $8,000 to $20,000 each replacement in this market. Metal also handles Houston’s humidity without the granule loss and algae issues shingles face, and many insurers in Harris County offer better wind and hail rates for standing seam. Run the per-year cost: metal often wins by year 15.
How long does metal roof installation take in Houston?
A typical Houston metal roof installation takes 3 to 7 days from tear-off to final inspection, depending on roof size and complexity. Tear-off adds a day for most homes, and Houston’s afternoon thunderstorms can create short weather delays in summer. You’ll have a scheduled crew and a live person to call at (940) 289-7658 if anything shifts.
What gauge of metal roofing should I use in Houston?
Use 26-gauge steel minimum in Houston. The thinner 29-gauge panels can oil-can visibly and don’t handle Houston hail or high-wind events as well. If you’re within 15 miles of Galveston Bay, consider aluminum or a zinc-coated steel to handle the salt air. A written quote at (940) 289-7658 will state the exact gauge, brand, and fastening pattern before you sign.
Does a metal roof lower insurance premiums in Houston?
Many Houston homeowners see lower wind and hail premiums with standing seam metal, particularly Class 4 rated systems, because insurers recognize the impact resistance compared to asphalt shingles. The reduction varies by carrier and policy, and it’s worth a call to your agent before you commit. We’ll provide the spec sheet your insurer needs after installation.
Can I install a metal roof over existing shingles in Houston?
Houston code allows a metal roof-over on a single layer of shingles in some cases, which saves the $2,000 to $4,500 tear-off cost, but we rarely recommend it. You can’t inspect the decking for moisture damage, which is common in Houston attics, and fastening through shingles compromises wind uplift resistance. Tear-off is the by-the-book route, and it’s what we put in our written scope.
Why Bradford Remodeling Co Houston
Bradford Remodeling Co Houston operates under The Garrison Standard, which means every price and every guarantee goes in writing before a single tool comes out. Curtis Lane runs the operation with a simple rule: the number on the estimate is the number on the invoice. No reprice at the door, no surprise line items, no scope drift.
Every metal roof installation from Bradford Remodeling Co Houston carries the 365-Day Done Right Promise. If the work fails inside that window, we come back and correct it at no charge. You get that in writing, along with a documented scope, at job close. The site is clean, the materials are documented, and the signed guarantee is in your hand.
Learn more about our Metal Roof Installation in Houston process, or return home to see the full range of services we offer.
Pricing reflects the Houston market as of 2026. Bradford Remodeling Co Houston offers free estimates – call (940) 289-7658.
Written by Curtis Lane, Owner at Bradford Remodeling Co Houston, serving Houston since 2004.
What Our Customers Say
"Straightforward people who do what they say. The crew did what the contract said and called before changing anything."
- Dianne W."Kitchen remodel run by a veteran-owned crew. They started on the day promised, kept the site clean, and gave weekly updates. New cabinets and counters look great."
- Alan M."Replaced old windows and trim while redoing the kitchen. Clean finish work."
- Ron F.
