Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Houston Homeowners Choose Therma-Tru Construction
Bradford Remodeling Co Houston provides independent Therma-Tru construction, repair, and installation service across Houston, from Heights bungalows to Sugar Land track homes. We work on Classic-Craft, Fiber-Classic, Smooth-Star, and Pulse Series doors, and we know exactly how these units fail in Houston’s subtropical heat, humidity, and clay soil movement. We are not affiliated with or authorized by Therma-Tru. We’re an independent remodeler that sees these doors after other installers have moved on, which means we fix the real problem the first time. Call (940) 289-7658 for a written price before any work starts.
Why Trust Bradford Remodeling Co Houston for Your Therma-Tru Construction?
Curtis Lane, our owner, has been running crews in the Houston market for over a decade. He keeps a worn copy of the local building code on his truck’s center console, and his crews know the difference between a Therma-Tru Classic-Craft slab and a Fiber-Classic slab without looking at the label. That matters when we’re ordering parts or matching an existing door’s finish. We work warranty-safe. If your Therma-Tru door is still under manufacturer warranty, we document the failure, preserve the original components, and install only OEM Therma-Tru slabs, jambs, and weatherstripping so your claim stays intact. Every job gets a written price before tools come out, and every completed job carries the 365-Day Done Right Promise: if the work fails inside a year, we come back and correct it at no charge.
Bradford Remodeling Co Houston is part of the Garrison Partners family, established in 2004, independently owned and operated, and held to The Garrison Standard as your trusted General Contractor. That means a background-checked, uniformed technician shows up, the scope is in writing, and the price doesn’t move at the door. Our crews know Therma-Tru’s multi-point lock geometry, adjustable sill design, and fiberglass skin thickness. That’s not trivia. It’s what lets us diagnose a binding door in ten minutes instead of guessing.
Key Takeaways
- Independent Therma-Tru service provider in Houston – not manufacturer-authorized, never steered by a warranty path
- Written price before any work starts, every time
- 365-Day Done Right Promise on every completed job
- OEM Therma-Tru parts used when warranty is active or fitment is critical
- Curtis Lane has run Houston crews for over a decade; he reads a scope of work like a box score
Styles & brands we work with
Common Therma-Tru Construction Problems We Fix in Houston
- Bubbled and delaminated finish on Classic-Craft doors. Houston’s humidity, especially on western exposures that bake in afternoon sun, forces moisture into the fiberglass skin and lifts the finish. We see it most on Classic-Craft Mahogany Collection doors that were never resealed. Patching delamination is temporary. When the slab is bubbled across more than a third of its face, a new slab is the honest fix.
- Sagging or binding entry doors from clay soil movement. Houston’s expansive clay soil shifts with moisture, and slab-on-grade foundations move with it. That means heavy Therma-Tru entry doors start binding at the top corner or dragging across the sill. The door isn’t bad. The rough opening has moved. We shim the rough opening square using composite shims rated for Houston’s movement, then recalibrate the hinges and multi-point lock.
- Warped and cracked sidelight frames on Fiber-Classic units. When sprinkler overspray keeps the sill wet, the Fiber-Classic sidelight frame absorbs water, swells, and eventually cracks. It’s a repetitive pattern in Houston, where irrigation systems cycle daily in summer. We replace the frame, correct the sprinkler throw, and reseal the sill with a moisture-resistant barrier.
- Failed compression weatherstripping and bottom sweeps after wind-driven rain. Houston gets real rain. A tropical storm or strong front pushes water horizontally, and compression weatherstripping that’s three years old gives up. We replace sweeps and weatherstripping with OEM Therma-Tru profiles when available, or a quality aftermarket match when speed matters.
- Multi-point lock misalignment on Pulse Series doors. Therma-Tru’s Pulse Series uses a multi-point locking system that throws bolts at the top, bottom, and center. When the door settles even slightly, the bolts no longer line up with the strikes. We recalibrate the lock, adjust the strikes, and test the throw. A multi-point lock that works is a genuine security feature. One that doesn’t is a false sense of security.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We prefer OEM Therma-Tru door slabs, jambs, and weatherstripping when the original warranty is still active or when fitment is critical. Therma-Tru’s slab thickness, corner seal geometry, and finish systems are engineered together. Mixing a cheap aftermarket slab with an OEM jamb creates gaps no weatherstripping can close. That said, we stock quality aftermarket hinges, bottom sweeps, and multi-point lock components locally for faster turnarounds when a door is out of warranty and the homeowner just needs it working. The repair-vs-replace decision is simple: if the slab has both finish delamination and structural issues, or if the frame is compromised, patching is temporary. We recommend a full replacement and we write that recommendation down with the price attached. Call (940) 289-7658 for an honest assessment and a written estimate.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We measure the reveal gap around all four edges, check the slab for delamination, inspect the sill for rot or moisture wicking, and test the multi-point lock throw. We write down what’s failed and why. Straight scope, straight number – that’s the whole conversation.
- 2
Repair or install. If the slab is salvageable, we repair with OEM or matched components, recalibrate hinges and locks, and seal the perimeter. If we’re installing a new Therma-Tru slab, we shim the rough opening square, set the jamb plumb and level, and use composite shims that don’t compress in Houston’s humidity.
- 3
Test. After every Therma-Tru door installation or repair, we open and close the door a minimum of 20 times, throw the multi-point lock, and check the weatherstripping compression with a dollar bill test. If it slides out too easily, we adjust until it doesn’t.
- 4
Warranty. You get the 365-Day Done Right Promise in writing before we leave. Site is clean. Scope is documented. The signed written guarantee is in your hand. That’s what “squared away” looks like at job close.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Houston
We service and install the Therma-Tru product lines most common in Houston homes: Classic-Craft Mahogany Collection, Fiber-Classic Mahogany Collection, Smooth-Star fiberglass entry doors, and the Pulse Series. We stock common aftermarket parts locally – hinges, sweeps, multi-point lock components – and order OEM Therma-Tru slabs and jambs direct when warranty or fitment calls for it. Our crew replaced a 3/0 x 6/8 Classic-Craft fiberglass entry door in a 1970s ranch near Memorial Park after the original slab bubbled and the jamb warped. We pulled the old unit, shimmed the rough opening square with composite shims, installed a new Classic-Craft Mahogany door with stainless steel hinges and an adjustable sill, and foamed the gap with low-expansion foam. The Slate multi-point lock was recalibrated so the door closes with one finger. That’s the standard.
We Also Service These Brands
Therma-Tru is one brand we know deeply, but we also install and service KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures. Bradford Remodeling Co Houston is not tied to any single manufacturer. We spec materials based on what works for your house, your budget, and Houston’s climate.
FAQs – Therma-Tru Construction Service in Houston
It depends on how far the delamination has spread. Small bubbles under a square foot can sometimes be stabilized and refinished, but Houston humidity keeps working on fiberglass, and patched areas often re-bubble within a year or two. If the delamination covers more than a third of the door face or extends to the edges, a new slab is the honest fix. Call (940) 289-7658 and we’ll give you a straight answer with a written price.
That’s foundation movement. Houston’s expansive clay soil absorbs moisture in the wet season and shrinks in the dry season, and slab-on-grade foundations shift with it. Your door frame is racking slightly, and summer’s moisture cycle is enough to close the reveal at one corner. The fix is re-shimming the rough opening and resetting the jamb. It’s not a door problem. It’s a Houston soil problem.
We use OEM Therma-Tru weatherstripping when the door is under warranty or when the profile match matters. When speed matters and the door is out of warranty, we stock quality aftermarket compression weatherstripping that matches the original profile. We’ll tell you which route we’re taking and why, before we order anything.
Yes, in most cases. If your slab is an older Therma-Tru entry door with a standard deadbolt bore, we can often retrofit a multi-point lock system with new strikes and a Slate-style trim. Some older slabs require additional routing, which we handle in our shop before install day. It’s a worthwhile upgrade for security, especially on an exterior door that’s the primary entrance.
We remove the sidelight frame, inspect the rough opening for rot or moisture wicking, replace any damaged substrate, and reseal with a moisture-resistant barrier before reinstalling. We also check the source: in Houston, that’s often sprinkler overspray or a gutter downspout dumping water next to the entry. If we don’t fix the water source, the same failure comes back. That’s exactly the kind of repeat visit our 365-Day Done Right Promise is designed to prevent, not to enable.
Therma-Tru door repair in Houston typically runs $400 to $1,800 depending on what’s failed. Full entry door replacement with a new Therma-Tru slab, jamb, and hardware usually falls between $2,000 and $6,500, and a complete entry system with sidelights can exceed that range. Every project gets a written price before work starts, and that number doesn’t move at the door. Call (940) 289-7658 for an exact quote – estimates are free.
Book Your Therma-Tru Service in Houston, TX
Call (940) 289-7658 for a free estimate on Therma-Tru repair or replacement. A live person answers 24/7, not a voicemail. You’ll get a written price, a documented scope, and the 365-Day Done Right Promise in writing before a single tool comes out.
Written by Curtis Lane, Owner at Bradford Remodeling Co Houston, serving Houston since 2004.
