A Bradford company - serving Houston, TX
A remodeled primary bathroom with a soaking tub and a walk-in shower

Sterling Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Houston
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A remodeled primary suite with built-in wardrobes and a window seat
A garage converted into a guest room and home office
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Sterling Roofing: The Houston Owner’s Guide

We stock and install Sterling-compatible roofing components across Houston, and most roof repairs on Sterling systems run $400 – $1,800 installed, depending on what failed and how much decking or underlayment has to come with it. If your roof is beyond repair, a full Sterling roof replacement in Houston typically lands between $8,000 and $20,000. Homeowners usually find us the same way: a water stain shows up on the ceiling after a hard rain, or a shingle tab breaks loose during one of those spring wind events that roll through places like Katy and Cypress, and suddenly the roof they haven’t thought about in years is the only thing on their mind.

Call (940) 289-7658

Here’s the straight version of how this works. Sterling roofing systems in Houston take more weather abuse in five years than roofs in drier climates take in twenty. Heat, humidity, UV exposure, and wind-driven rain all work on the same weak points. When a part fails, you want it matched to the system, priced in writing, and installed by a crew that doesn’t leave nails in your driveway. That’s the job we do.

Which Sterling Models This Applies To

A wood double vanity with two mirrors after a bathroom remodel

Sterling manufactures multiple roofing product lines, and the parts are not all interchangeable. The most common Sterling systems we service in Houston are their asphalt shingle lines, including architectural and three-tab profiles, along with their ridge cap and accessory components. Here’s the compatibility gotcha we run into constantly: Sterling’s architectural shingles are dimensionally different from their three-tab line, and mixing them creates a visible seam and a weak point at the transition. The shingle width, exposure, and nail strip placement are not the same.

If you’re trying to identify what you have before you call anyone, check the roof itself first. Newer installations often leave a bundle wrapper in the attic or garage. The wrapper lists the shingle line, color code, and sometimes the lot number. If that’s gone, we identify the shingle by its physical profile: tab count, exposure height, and granule color. That last part matters more than people expect. Sterling runs production in batches, and a color code from a different batch can be visibly off, especially on a south-facing Houston roof that’s had five years of UV light working on it. Curtis Lane has walked enough Houston roofs to know that what looks identical on a sample board doesn’t always look identical on the house. When OEM Sterling parts aren’t available or the color match won’t hold, we quote quality aftermarket equivalents that meet the same wind and impact ratings, and we put that substitution in writing before any work starts.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Sterling Roofing Is Failing

  • Granules in the gutters or at downspout bases. Sterling shingles shed granules as the asphalt layer ages and bakes in Houston heat. If you see a steady accumulation after every rain, the shingle surface is degrading and the protective layer is thinning.
  • Curling or lifting shingle tabs. This usually starts at the eaves or on the hottest south-facing slopes. The shingle’s adhesive strip lets go, the tab lifts, and wind gets under it. Once a tab is up, it’s a sail waiting to tear off.
  • Water stains on ceilings or walls, particularly after wind-driven rain. This tells you the roofing system has failed somewhere, but the leak point isn’t always where the stain is. Water travels along rafters and sheathing before it drops. We trace it back to the source, usually a failed flashing detail or a punctured underlayment around a penetration.
  • Cracked or missing ridge cap shingles. The ridge takes more wind uplift than any other part of the roof. On Sterling systems, the cap shingles are factory-formed and designed to flex, but years of thermal cycling in Houston humidity make them brittle. This is one of the first components we see fail.
  • Nail pops or lifted shingle edges you can see from the ground. When the decking expands and contracts with Houston’s temperature swings, nails work loose and back out through the shingle. A popped nail is a small problem until it lets water in, and then you’re replacing sheathing instead of a shingle.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled primary bathroom with a soaking tub and walk-in shower

For a targeted Sterling roof repair in Houston, the installed price typically runs $400 – $1,800. The range depends on what actually failed. A single section of ridge cap replacement is on the lower end. A repair that involves replacing flashing at a chimney or vent, cutting out water-damaged decking, and matching shingles across a roof slope is on the higher end. The parts themselves are usually a small portion of the bill. What you’re paying for is a crew that shows up with the right material, does the work in a day, and leaves the site clean.

If the roof has reached the point where repairs no longer make sense, a full Sterling roof replacement in Houston runs $8,000 – $20,000, with the spread driven by roof size, pitch, decking condition, and whether we’re tearing off one layer or two. Every quote we give is a written price before any work starts, and it stays that number unless we find something structural that requires a documented change order before we proceed. Every completed roof repair or replacement carries our 365-Day Done Right Promise: if the work fails within the guarantee period, we return and correct it at no charge. That commitment follows The Garrison Standard, which is the only way Curtis runs a job site.

DIY or Call Us?

Here’s the honest split. You can safely check a few things from the ground: look for missing shingles, curling tabs, and visible flashing damage after storms. You can also check your gutters for granule buildup twice a year. What we don’t recommend is getting on a Houston roof without proper training and fall protection. Steep pitches, morning dew, and loose granules make for a surface that takes people down fast. Roofing work is also not forgiving when it’s done wrong. A homeowner who patches a leak with caulk or flex seal and gets it wrong has usually converted a $600 repair into a $1,800 repair with water-damaged decking.

If you see active water coming in, call us. We’ll put a crew on it, identify the failure point, and give you a written number before any work starts. Reach us at (940) 289-7658. Straight scope, straight number, that’s the whole conversation.

FAQs

A powder room with botanical wallpaper and a stone sink

Getting started with Bradford in Houston

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Houston team

A local crew that works across Houston and the towns around it, to the same written standard as every Bradford location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Houston? Licensed & insured · Free written quotes response · free estimates
Call (940) 289-7658
Local Service Coverage

Request a Free Estimate in Houston

Tell us what you need - Bradford Remodeling Co Houston responds fast. No obligation.

By requesting your free estimate, you agree to the terms of our Privacy Policy and consent to receive communications through phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch