Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Roofing: The Houston Owner’s Guide
We stock and install CWS-compatible roofing components across Houston, with most residential replacements running $400 to $1,800 for repairs and $8,000 to $20,000 for full roof replacement. If you have a failed panel, flashing, fastener system, or underlayment issue, our crews can typically diagnose it same-week and get parts ordered within days, not weeks. Most Houston owners discover a problem the way you probably did: a water stain on the ceiling after a hard rain, granules in the gutter, or a shingle or panel that lifted during one of our spring wind events.
We’re an independent service provider, not affiliated with CWS, which means we give you straight answers about what’s worth replacing and what isn’t. Curtis Lane has been reading roof scopes in Houston for over a decade, and he’ll tell you the same thing he tells every homeowner: CWS roofing systems are built to a spec, and matching that spec matters more than the logo on the box.
Which CWS Models This Applies To
CWS roofing products fall into two general families: the residential asphalt shingle line and the metal panel line used on both homes and light commercial structures. The compatibility gotcha most homeowners hit is fastener pattern. CWS metal panels use a specific rib spacing, and if you mix panels from a different series, the screw lines won’t land on the ribs and you’ll get leaks at the seam. We’ve seen it happen in Meyerland more than once.
To identify your exact part, look for the stamped code on the underside of any removed panel or on the shingle wrapper if you have leftover bundles. The code tells us the series, gauge, and profile. For shingles, the color lot matters if you’re patching instead of replacing: a mismatched lot will be visible from the street even if the product number matches. When it comes to OEM versus aftermarket, we carry both. OEM keeps the manufacturer warranty intact. Quality aftermarket equivalents, usually from GAF or CertainTeed, often match or exceed the spec for less money. We’ll show you both options in writing before you commit.
Styles & brands we work with
Signs Your CWS Roofing Is Failing
- Water stains on ceilings or walls after rain. This is the symptom that gets most Houston homeowners on the phone. The stain usually means a flashing failure at a penetration (vent pipe, chimney, skylight), not a failed shingle. Flashing fails first because it’s the thinnest metal on the roof and takes the most thermal expansion in Houston’s heat-and-humidity cycle.
- Granules collecting in gutters or downspout splash blocks. Asphalt shingles shed granules as the UV coating breaks down. Some granule loss is normal in the first year. Heavy accumulation year after year means the shingle substrate is drying out and the mat is exposed, which shortens the remaining life dramatically.
- Lifted or curling shingle edges after wind events. Houston gets real wind, especially March through May. Once a shingle lifts, the seal strip is broken and it won’t reseal. Water gets under, the decking gets wet, and you’re into a repair instead of a patch.
- Visible rust or corrosion at metal panel fasteners. CWS metal panels are coated, but the fasteners are the wear point. If the screw heads are rusted, the rubber washers underneath are likely shot too. That’s an entry point for water even if the panel itself looks fine.
- Sagging or soft spots when you walk the roof deck. This is the serious one. Soft decking means water has already penetrated the underlayment and is rotting the substrate. At that point you’re replacing sheathing, not just roofing. The longer it goes, the more the price climbs.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For CWS roofing in Houston, here’s what you’re looking at:
- Roof repair (flashing, shingles, fastener replacement): $400 to $1,800 depending on the number of penetrations and lineal feet of flashing.
- Full roof replacement (asphalt shingle): $8,000 to $20,000 depending on roof size, pitch, decking condition, and whether we’re pulling one layer or two.
- Metal roof installation: $15,000 to $40,000 for a full CWS-style standing seam or ribbed panel system.
- Tile roof repair (if your CWS system includes tile accents or transitions): $600 to $2,500.
Every price includes the parts, labor, tear-off and disposal when applicable, and a written scope before we start. No numbers move at the door. The 365-Day Done Right Promise applies to every CWS roofing repair and replacement we complete: if the work fails inside that window, we come back and correct it at no charge. It’s written, not spoken.
We also stock parts for KraftMaid, Cambria, and Silestone products if you’re dealing with multiple items around the house. Same written-price rule applies to everything we quote.
DIY or Call Us?
Here’s the honest split. You can safely check your gutters for granules, look for visible lifted shingles from the ground with binoculars, and photograph any water stains to send us. Those are good homeowner moves and they help us quote faster.
Stepping onto a Houston roof in July is where DIY goes wrong. The deck surface runs 140 to 160 degrees in direct sun, the shingles get slick with humidity, and a fall from even a single-story roof changes a life. Working with damaged flashing means bending metal at height and sealing it correctly on the first pass. That’s not a weekend project. Call (940) 289-7658 and we’ll put a trained crew on it. Straight scope, straight number, that’s the whole conversation.
FAQs
A properly installed CWS asphalt shingle roof in Houston typically lasts 15 to 20 years, with metal panels running 30 to 40 years, though our heat, humidity, and storm cycles take a real toll on the fasteners and flashings long before the panels themselves fail. The real lifespan killer here isn’t the shingle, it’s the underlayment and decking once water finds a path in. If your roof is past year 15 with original flashing, have it looked at before the next storm season. Call (940) 289-7658 to schedule an inspection, the estimate is free.
Yes, if the damage is isolated to flashings, fasteners, or a small section of shingles, repair usually runs $400 to $1,800 and buys you years of service. Replacement becomes the cheaper path when the decking is soft, the shingle mat is exposed across multiple slopes, or you’re chasing the same leak in three different places. We’ll tell you which one you’re in, in writing, before you spend a dime. Call (940) 289-7658 for a straight read on your roof.
Most CWS repairs are done in one day, including flashing fabrication and fastener replacement. A full asphalt shingle replacement on a typical Houston single-story runs three to five working days depending on weather and decking surprises once we tear off. Metal panel jobs run five to ten days because every panel is measured and cut on site. Curtis Lane’s crew gets the permit pulled and the inspection scheduled so there’s no lag between tear-off and closeout.
We keep common CWS-compatible fasteners, flashing stock, and sealants on the truck, and we have direct supply relationships for panels and shingles that get most parts to Houston in two to three days. For older CWS series that have been discontinued, we source verified aftermarket equivalents that match the original gauge and profile so you’re not waiting on a warehouse that may never restock. Call (940) 289-7658 with the stamped code from your panel or shingle wrapper and we’ll tell you exactly what’s available and for how much.
Written by Curtis Lane, Owner, Bradford Remodeling Co Houston at Bradford Remodeling Co Houston, serving Houston and nearby areas.
