Therma-Tru Fence Installation Nationwide

Therma-Tru Fence Installation: The Houston Owner’s Guide

Therma-Tru fence installation in Houston typically runs $3,500 – $9,000 installed, depending on linear footage, gate hardware, and whether we’re pulling new post footings or working with existing concrete. Most jobs are done in two to three days, not weeks. You usually find out your fence has failed the hard way: a gate drags after a hard rain, a post leans hard after the clay soil shifts, or a section pulls loose at the hinge line and suddenly the latch won’t catch. Therma-Tru makes doors, not fence kits, which catches some homeowners off guard. What they actually have is a Therma-Tru door or gate integrated into a fence run, and what’s failing is the frame, the post, or the hardware the fence builder used around it. We fix the whole assembly, and we spec the door side to Therma-Tru’s tolerances so the latch seats like it did on day one.

Call (940) 289-7658

Which Therma-Tru Models This Applies To

We’re an independent service provider, not affiliated with Therma-Tru, and we say that up front because it matters for warranty questions. Most Houston fences built around a Therma-Tru product use one of their exterior door lines: Fiber-Classic, Smooth-Star, Pulse, or the Legacy line if the builder went upmarket. The fence side isn’t Therma-Tru at all, which is where the confusion starts. What matters for compatibility is the door slab thickness (typically 1-3/4 inches), the hinge pattern, and the rough opening the original fence builder left. If the existing gate frame has sagged, the hinges have been carrying the fence panel’s weight against their shear rating, and the door side gets pulled out of square. That’s the compatibility gotcha: replacing the door doesn’t fix the fence; you have to true up the frame and re-hang. On the parts side, OEM Therma-Tru hinges and weatherstripping are worth the spend on the door line itself. For the fence structure, pressure-treated posts, galvanized hardware, and composite pickets that match the door color beat aftermarket wood-fill products in Houston’s humidity, every time.

Signs Your Therma-Tru Fence Installation Is Failing

• Gate drag at the latch side. The post has settled or the hinge screws have wallowed out. In Houston’s gumbo clay, post footings heave with the seasons, and the gate drops just enough to bind. You’ll see scrape marks on the threshold or the latch plate sitting lower than the strike.
• Fence panel pulls away from the door jamb. The original builder likely screwed the fence rail directly into the jamb without a stringer or proper backing. The door’s frame wasn’t designed to carry fence wind load, so the fasteners tear out slowly. You’ll see a gap at the top corner first.
• Door won’t latch after rain. This is swelling, usually in the fence pickets or the jamb, but it can also be the Therma-Tru weatherstripping compressing unevenly. If it only happens after a heavy Houston downpour, it’s moisture cycling; if it never latches, the frame is racked.
• Rust streaks below the hinges. Original hinge hardware on the fence side often gets skipped for cheaper coated steel. Once the coating fails, rust stains the door slab and the concrete below. The hinge pin wears, and the whole gate drops farther.
• Post leans but the fence stands straight. That’s the classic Houston footing failure: the post wasn’t set below the shrink-swell line, or it was set in concrete against a wood post that’s now rotted at grade. The fence following it is only a matter of time.

Replacement Cost & What’s Included

In Houston, expect $3,500 – $9,000 for a full Therma-Tru fence installation that includes new post footings set below the clay line, galvanized or stainless hardware, composite or cedar pickets to match the door, and a true re-hang of the door slab itself. A smaller job, like re-setting two posts and re-hanging an existing gate, lands near the bottom of that range. A full perimeter with a double gate, rot repair at the house connection, and color-matched composite to a Legacy-line door lands at the top. Every quote from Bradford Remodeling Co Houston is a written price before work starts: parts, labor, haul-off, and the exact scope in one line-item document. No number moves at the door. All work carries the 365-Day Done Right Promise, so if a post shifts or a hinge fails inside a year, we return and correct it at no charge.

DIY or Call Us?

You can check a few things yourself: run a level down the post, measure the gap at the top of the door, watch for scrape marks. But re-setting a post in Houston clay, re-hanging a Therma-Tru door in an existing fence, and getting the reveal even on all four sides is skilled work. Get the footing depth wrong and the same gate drags again next spring. Get the hinge pattern wrong on a legacy slab and you’ll crack the fiberglass finish. We’ve pulled plenty of failed DIY fixes apart to see the same thing: good effort, wrong depth, tired concrete. If you want the gate to shut square and stay shut, call (940) 289-7658 and we’ll bring a written quote. Straight scope, straight number – that’s the whole conversation.