Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Houston Owner’s Guide
Bradford Remodeling Co Houston installs and services Barrette roofing products across the Houston market, with most roof repair jobs landing between $400 and $1,800 depending on the scope. If a Barrette roof is failing, the signs usually show up after a hard rain or a big wind event: a lifted shingle edge, a soft spot near a valley, or water staining on the ceiling below. We keep Barrette-compatible fasteners, ridge caps, and flashing on hand, and most small repairs go in same-day once we’ve looked at the roof.
Barrette is known for their aluminum and vinyl railing systems more than their roofing line, but the Barrette roofing products we see in Houston are almost always concrete tile or composite shake profiles. These are architectural products, and they fail differently than the asphalt shingles you see on most Houston homes. The good news: when you catch the failure early, the fix is usually contained to a few tiles or one section of flashing. The bad news: if you wait, water gets into the substrate, and a $600 tile replacement becomes a $2,500 deck repair. That’s the Houston humidity doing what it does.
The most common call we get starts with, “There’s water coming in around the chimney,” or “A tile slid off during the last storm and I don’t know who to call.” If that sounds like your situation, we can walk you through it.
Which Barrette Models This Applies To
Barrette’s roofing line isn’t as widely documented as their railing and fence systems, which creates a compatibility headache for Houston homeowners. You won’t always find a clear model number stamped on the underside of a Barrette tile, so we match by profile, not by sticker. We measure the tile’s flat section, its rise, and the interlocking channel width, then match against the Barrette profiles we’ve documented from prior Houston installations.
The practical issue: Barrette roofing installed 15 or 20 years ago in Houston may have been spec’d through a regional distributor that no longer carries the same profile. When that happens, we have two honest options. We can source the exact OEM tile from a Barrette distributor if the profile is still in production, or we can match a quality aftermarket tile with the same dimensions and a compatible color. We’ll tell you which path we’re taking and put the price in writing before we start. No surprises at the door.
If your home has Barrette concrete tile, the critical spec is the interlock depth. Houston homes built in the 90s often have a shallower channel than current production runs, and forcing a newer tile into an older profile is how you get cracked corners in the first Houston hail season. We check the channel before we order anything.
Styles & brands we work with
Signs Your Barrette Roofing Is Failing
- Water staining on ceilings or walls, usually after a sustained rain. This tells you water has already made it past the tile and into the deck. In Houston, where we get those long spring soakers, the stain may not show up until the deck is saturated.
- Cracked or spalled tiles that look flaky at the edges. Spalling is when the tile surface starts shedding like old skin. It’s usually freeze-thaw damage or age, and it means the tile’s protective surface is gone, so it absorbs water instead of shedding it.
- Loose tiles that shift underfoot or after wind. If you can hear tile rattle during a gust, the fasteners or the clay bosses that hold the tile are done. In Houston’s storm season, that rattling is a warning sign, not a quirk.
- Rusted or lifted flashing around chimneys, skylights, or valleys. Flashing is the first thing to go on any Houston roof because it’s metal sitting in constant heat and humidity. Lifted flashing breaks the water seal, and that’s when leaks start.
- Granules from shingles or tile fragments in gutters and downspouts. If you’re finding tile chips in your gutter after every rain, the tile surface is degrading. That material is coming from somewhere, and it’s not coming back.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what we tell Houston homeowners up front, because you deserve a number, not a guess. A small Barrette roof repair, such as replacing 5 to 10 cracked tiles or resealing a section of flashing, typically runs $400 to $1,800 installed. If the deck or substrate underneath has water damage, that’s a different scope, and we’ll show you the deck repair cost separately so you know exactly what you’re paying for.
Every quote from Bradford Remodeling Co Houston includes parts and labor, written out line by line, before any work starts. We don’t reprice at the door. The written price is the price. And every repair carries the 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. That’s the Garrison Standard, and it’s in writing on every job.
What drives the range: tile availability (OEM Barrette tiles cost more when we have to special-order them), roof pitch, and whether the damaged area is a simple field replacement or involves flashing around a penetration. We measure and quote before we touch anything.
DIY or Call Us?
You can safely do the visual check: walk the perimeter of your home, look for cracked tiles, check gutters for tile chips, and watch for water staining after the next rain. That tells you where the problem is. What you shouldn’t do is get on a Houston roof in July or after a rain to try a tile swap yourself. Roofing is dangerous enough for crews who do it daily; doing it on a wet tile surface without the right fall protection is how people get hurt. High roof work needs a trained professional.
If you spot the signs, call us at (940) 289-7658. We’ll send a background-checked, uniformed technician to inspect the roof, show you what we found, and write up a price before any work starts. That’s the whole approach: straight scope, straight number.
FAQs
Concrete tile roofing can last 40 to 50 years in Houston if the flashing holds and the tiles stay intact, but Houston’s heat, humidity, and storm cycles usually cut that to 30 to 40 years before you need meaningful repairs. Composite shake profiles typically top out around 25 to 30 years in this climate. Call (940) 289-7658 and we’ll assess what’s left on your roof.
Small hairline cracks can sometimes be sealed with an elastomeric compound, but any crack that goes through the tile means the tile is compromised, and replacement is the honest fix. Sealing a through-crack is a temporary patch that fails in the next Houston rain event. Call (940) 289-7658 and we’ll tell you which applies to your roof.
Most single-section repairs, such as tile replacement or flashing reseal, take one day on site. If we discover deck damage underneath, the job extends because the substrate has to be repaired before the tile goes back on. We’ll give you a timeline in writing before we start. For a same-week assessment, call (940) 289-7658.
We stock common Barrette-compatible fasteners, ridge caps, and flashing on our trucks, but tile profiles vary too much to keep every one in inventory. We source the exact profile after matching your existing tile, which usually takes one to three business days. Call (940) 289-7658 and we’ll start the match.
If you have a Barrette roof that’s failing, or you’re not sure but you saw a sign that worries you, call (940) 289-7658 for a free estimate. We’ll inspect, document, and put everything in writing before any tool comes out, and we’ll stand behind it for a full year. That’s what squared away looks like at close: a clean site, a documented scope, and a signed written guarantee in your hand.
Written by Curtis Lane, Owner, Bradford Remodeling Co Houston at Bradford Remodeling Co Houston, serving Houston and nearby areas.
