Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Houston Owner’s Guide
We stock and install Boral-compatible roofing materials across Houston, with most tile repairs and replacements landing between $600 and $2,500 installed depending on how many tiles failed and what’s happening underneath them. If you’re reading this, you probably spotted a cracked tile in the yard after a storm, or a roofer told you the underlayment under your Boral roof is shot. Either way, the fix starts with matching the right tile profile to what’s already on your roof.
Boral tile roofs in Houston fail in predictable ways. The tile itself is tough stuff, concrete or clay fired to handle decades of sun. What gives out first is usually the underlayment, the waterproof layer beneath the tile, or the flashing where roof planes meet walls and valleys. Houston’s humidity and storm-driven rain expose these weak points faster than the tile ever wears out. Curtis Lane has pulled enough Boral tiles off Houston roofs to know the tile is rarely the villain. It’s what’s underneath, or what wasn’t flashed right in the first place.
Which Boral Models This Applies To
Boral’s roofing line in the U.S. market centers on concrete and clay tile profiles, including flat, low-profile, and high-profile barrel shapes. The most common lines we match in Houston are the flat concrete tiles and the double-barrel clay profiles you see on older custom homes in Memorial and Tanglewood. Each profile has a specific interlocking geometry, and they do not interchange. You can’t lay a flat Boral tile where a barrel tile goes and expect it to lock or shed water correctly.
Here’s a compatibility gotcha most homeowners don’t know: Boral tile dimensions vary by profile, and the same-looking tile from a different batch year can sit slightly proud or leave a wider gap at the interlock. Houston’s heat cycling makes those small differences worse over time. If you have a few broken tiles, the right move is to match the profile by measuring the tile’s exposed width and checking the underside for a stamp or mold number. For older Boral roofs, OEM tiles may be discontinued, and a quality aftermarket match is the practical fix. We’re an independent service provider, not a Boral affiliate, so we’ll tell you straight whether OEM is worth chasing or an aftermarket equivalent will do the job.
Styles & brands we work with
Signs Your Boral Roofing Is Failing
- Broken or cracked tiles in the yard after a storm. Impact damage from hail or wind-blown debris is the usual cause. One broken tile is a repair; multiple broken tiles across the roof plane usually means the whole field is getting brittle, and you’re looking at a wider replacement scope.
- Dark streaks or water stains on the ceiling or in the attic. This means water got past the tile, which means the underlayment has a breach. The tile may look fine from the street. Houston’s heavy downpours will find the breach every time.
- Granules or tile residue in the gutters. Concrete tile erodes slowly, but if you’re seeing significant grit every time you clean gutters, the tile’s surface is breaking down. That speeds up moisture absorption, which accelerates the failure cycle here.
- Visible flashing pulled away from chimneys, walls, or valleys. Houston’s wind and heat cycling work on metal flashing until it pries loose. Once flashing lifts, water runs behind the tile and under the roof’s edge protection.
- A tile that shifts or slides when you press on it from a ladder. Tiles should sit locked and still. Movement suggests broken interlock or a failed fastening. Don’t walk a Boral tile roof to check this. Call a roofer with roof scaffold and the right pads.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Boral tile roof repair in Houston, expect $600 to $2,500 installed. Tile roof repair across the broader Houston market runs in that same range because the real cost driver is access, underlayment condition, and how many tiles need to come off to do the job right. Replacing a few tiles on a single-story roof with easy access runs on the lower end. Replacing underlayment under a section of tile, or re-flashing a valley, pushes toward the higher number.
| Scope of Work | Houston Price Range |
|---|---|
| Tile-only repair (1 – 5 tiles, easy access) | $600 – $1,200 |
| Tile repair plus flashing work | $900 – $1,800 |
| Section underlayment replacement under tile | $1,500 – $2,500 |
| Full roof replacement (Boral-compatible tile or alternative) | $8,000 – $20,000 |
Every Boral roof repair we quote includes the written line-item price before we start, the parts, the labor, the removal of broken tile, and the job-site cleanup at the end. The 365-Day Done Right Promise covers the repair for a full year in writing. If the fix doesn’t hold inside that window, we come back and correct it at no charge. That’s the Garrison Standard, and it applies to every Boral tile we set.
DIY or Call Us?
You can safely inspect from the ground with binoculars: look for missing tile, shifted rows, lifted flashing, and visible underlayment. You can also check the attic for water staining after a Houston storm. What you should not do is get on a tile roof and start pulling tiles. Concrete and clay tile is heavy, the pitch is often steep, and a broken tile edge is sharp enough to cut through a work glove. Worse, walking on tile you can’t see through can crack the very tiles you’re trying to save.
The honest split is this: identify and document from the ground, then call us. We’ll match the profile, check the underlayment and flashing while we’re up there, and give you a written price before any tile comes off. Straight scope, straight number, that’s the whole conversation. Reach us at (940) 289-7658.
FAQs
Boral tile itself can last 50 years or more, but the underlayment beneath it typically has a 20 to 30 year service life in Houston’s climate, which means most Boral roofs here need underlayment replacement long before the tile wears out.
In most cases, no. A cracked tile has lost its structural integrity, and sealants or adhesives won’t restore the interlock or keep water out over a Houston summer. Replacement of the damaged tile is the reliable fix.
Most tile repairs and flashing fixes take half a day on site once materials are matched and staged. Section underlayment replacement can run a full day or more depending on the size of the affected area.
We stock common Boral flat and barrel profiles used in Houston and can source discontinued or hard-to-match tiles through our documented supplier roster, which means no guessing on color or profile. Call (940) 289-7658 and we’ll check the match before you spend a dime.
When you call Bradford Remodeling Co Houston about a Boral roof, you get a written price, a real trade explanation of what failed, and a one-year guarantee in writing. We also work with a documented roster of name-brand materials across our projects, including KraftMaid, Cambria, and Silestone, so every spec is traceable and every warranty has a paper trail. Call (940) 289-7658 for your free estimate.
Written by Curtis Lane, Owner, Bradford Remodeling Co Houston at Bradford Remodeling Co Houston, serving Houston and nearby areas.
