Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Houston Homeowners Choose CGI Construction
We’re an independent CGI repair in Houston service team, and we repair and install CGI Sentinel Series, Estate Collection, and Targa Series impact windows and doors. The work we do most often is fixing failed seals, fogged laminated glass, and sagging impact-rated door panels that Houston’s humidity and clay soil have worked loose. We’re not authorized by CGI, and we’ll say that plainly. What we are is a crew that has taken apart enough CGI openings across the Gulf Coast to know exactly where these products fail and how to fix them without touching the storm rating you paid for. Call (940) 289-7658 for a straight diagnosis.
Houston’s building conditions are unlike almost anywhere else in the country. No zoning means a house in Meyerland can sit three blocks from a metal fabricator, and the floodplain rules change from one side of a subdivision to the next. Add expansive clay soil that heaves window bucks out of square and subtropical humidity that works on every seal in an impact window, and you get failure patterns that a manufacturer’s brochure never mentions. That’s the work we do. Every CGI job here starts with the same question: what did the storm rating require, and what has Houston done to it since? Curtis Lane, our owner, reads a scope of work the way other people read a box score. Straight scope, straight number, that’s the whole conversation.
Why Trust Bradford Remodeling Co Houston for Your CGI Construction?
CGI products are engineered for hurricane zones, which means every component works together: the laminated glass, the heavy-gauge frame, the fasteners, the flashing. You can’t treat one piece in isolation. Our technicians know the Sentinel Series residential line, the Estate Collection’s heavier architectural profiles, the Targa Series impact doors, and the Commercial Series storefront systems. We know which glass packs are factory-laminated to Miami-Dade specs and which hardware was designed to carry the weight of an impact-rated door panel without sagging. That’s not catalog knowledge. That comes from pulling sashes, inspecting edge seals, and seeing what ten years of Houston humidity does to butyl.
Curtis grew up in Los Angeles and picked up his first framing hammer before he could legally drive, then earned his carpentry and construction management credentials through Los Angeles Trade-Technical College. He’s been running crews as a General Contractor in the Houston market for over a decade, from gut-rehab kitchens in Montrose to structural repairs after storm season. His truck’s center console has a worn copy of the local building code in it. His crew finds that equal parts admirable and maddening, but it’s the reason our CGI work always gets pulled back to the same standard: the opening has to perform the way the manufacturer rated it, or we don’t call it done.
Every CGI repair or installation from Bradford Remodeling Co Houston comes with a written price before any work starts. No numbers that move at the door. And every completed project carries the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge. That written guarantee is in your hand before the crew rolls out.
Styles & brands we work with
Common CGI Construction Problems We Fix in Houston
Here’s what we actually find inside failed CGI windows and doors in this climate. These aren’t brochure problems. These are the calls that come in after a spring storm or the first cold front of November.
- Fogged laminated glass in Sentinel Series windows. The argon gas between the panes leaks out through a failed edge seal, and Houston’s humidity replaces it with moisture. You see interior fogging or a milky film that never wipes clean. The glass unit has to be replaced with an exact-size laminated insulated unit matched to the original impact rating.
- Deteriorated butyl sealant along Estate Collection edges. Thermal cycling, which Houston does aggressively from March through October, breaks down the butyl seal that bonds the glass to the frame. Once that seal goes, water gets behind the frame, and you start seeing staining or soft drywall below the window. Re-sealing with marine-grade butyl is the fix, but only after we’ve confirmed the opening is dry and the substrate is still sound.
- Corroded or loosened stainless steel fasteners on older installations. Houses closer to Galveston Bay or anywhere the salt air reaches see this faster, but even inland, Houston’s clay soil shifts window bucks enough to work fasteners loose. A loose fastener on an impact window isn’t a cosmetic issue. It changes how the entire unit transfers load during a storm. We replace with exact-specification hardware and re-torque to the manufacturer’s pattern.
- Sagging Targa Series impact door panels. Impact-rated door panels are heavy. The Targa Series hinges are engineered for that weight, but after years of use, especially if the door faces direct afternoon sun, the panels drift. You get dragging on the threshold and compression on the weather seal. Sometimes it’s a hinge adjustment. When the hinge leaves are worn or the frame has shifted, it’s a more involved correction.
- Water intrusion at the head flashing during driving rain. Houston gets rain that comes in sideways. If the head flashing was installed without proper overlap or the sealant has cracked, water gets behind the frame and runs down the interior wall. The fix means pulling the interior trim, checking the rough opening, and re-flashing so the water sheds the way it should.
CGI Parts & Our Repair-vs-Replace Approach
For CGI window and door service, we use OEM or exact-specification aftermarket glass units, sealants, and hardware that match the original impact rating. There’s no shortcut part on an impact-rated opening. A standard dual-pane unit without the laminated interlayer fails the test the product was engineered for, and we won’t install one. That’s a line we hold.
We stock the common CGI parts and materials in Houston for fast turnaround: laminated insulated glass units in standard Sentinel and Estate dimensions, marine-grade butyl sealant, stainless fasteners in the correct thread and length, and replacement weather seals for Targa Series doors. If a part has to come from the manufacturer, we tell you the lead time up front, in writing. No surprises.
The repair-versus-replace call is honest. If a sash or frame has corroded beyond reliable structural performance, we say so. Rebuilding around compromised metal doesn’t save money. It leaves you with an opening that looks fine until the storm that matters. If we tell you to replace, it’s because replacement is safer, not because we’re looking for a bigger ticket. Call (940) 289-7658 and we’ll give you our read, straight.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We inspect the entire opening, not just the symptom. That means pulling the sash when needed, checking edge seals, flashing, fasteners, and the rough opening behind the frame. We document what we find and put the repair scope in writing.
- 2
Repair or install. We replace glass units, re-seal frames with marine-grade butyl, re-torque or replace fasteners, and re-hang door panels. Every material matches the original impact specification. No generic swaps.
- 3
Test. We water-test the opening before reinstalling interior trim. If it’s a door, we check the swing, the seal compression, and the threshold clearance. The opening has to perform to the rating, not just look right.
- 4
Warranty. You get the 365-Day Done Right Promise in writing. If the work fails inside a year, we return and correct it at no charge. The site is left clean, the scope is documented, and the signed guarantee is in your hand.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Houston
We service and install the CGI Sentinel Series impact windows, the Estate Collection impact windows, the Targa Series impact doors, and the Commercial Series impact storefront systems, and we also provide CGI service in Sugar Land. In Houston, the Sentinel Series is what we see most often in suburban tract homes from the 1970s through the 2000s, while the Estate Collection shows up in custom builds inside the Loop. The Targa Series is common on newer Gulf Coast homes where impact doors are spec’d from the start. We also handle CGI window replacement and impact window installation when the existing unit is beyond repair. Specialty roofing work that ties into CGI openings, including flashing details and water management, is part of the same scope.
One thing a homeowner in Meyerland, not far from those needing CGI Construction in Jersey Village, TX, showed us after a spring storm: condensation between the panes of two CGI Sentinel Series bedroom windows. Our tech removed the sashes, confirmed the argon gas had leaked through failed edge seals, and ordered exact-size laminated insulated glass units to match the original impact rating. We replaced the glass, re-sealed the frames with marine-grade butyl, and retested the openings for water intrusion before reinstalling interior trim. That’s the job, end to end.
We Also Service These Brands
CGI is not the only product line we work with. We also service and install KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures across Houston. Being multi-brand keeps our perspective honest. If a CGI unit is the right call, we’ll say so. If another brand fits the project better, we’ll say that too.
FAQs – CGI Construction Service in Houston
In most cases, the glass can be replaced without pulling the entire frame. We remove the sash, take exact measurements, and order a laminated insulated glass unit that matches the original impact rating. If the frame itself is corroded or the fasteners have failed, a full replacement may be the safer call. Call (940) 289-7658 and we’ll tell you which one applies to your opening.
We order glass units and hardware to the same specification as the original CGI product, including the laminated interlayer and glass thickness. The replacement has to carry the same storm performance as the unit it’s replacing. We do not substitute standard dual-pane glass in an impact-rated opening. That rating is the reason you bought CGI.
The argon gas between the panes has leaked through a failed edge seal, and humid air has moved in to replace it. Houston’s heat accelerates thermal cycling, which stresses those seals year after year. The fix is replacing the insulated glass unit and re-sealing the frame with marine-grade butyl. The frame usually stays in place. Call (940) 289-7658 for an exact quote; estimates are free.
It’s usually hinge wear or panel sag. Targa Series door panels are heavy, and over time the hinges drift under the load, especially on doors that face direct afternoon sun. Sometimes a hinge adjustment fixes it. If the hinge leaves are worn or the frame has shifted, the repair is more involved. We’ll diagnose it and put the scope in writing before any work starts.
We’re an independent CGI service provider, not a manufacturer-authorized warranty center. We can document the failure, provide the written findings you need for a manufacturer claim, and complete the repair or replacement. Our own workmanship is covered by the 365-Day Done Right Promise, in writing, on every job.
Impact window installation in Houston typically runs $8,000 to $25,000 depending on the number of openings and the CGI series. Full window replacement starts around $4,500 and runs to $15,000. Glass-only repair on a CGI Sentinel or Estate unit is often less than a full replacement. Here are the ranges we work from:
| Service | Houston Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
Call (940) 289-7658 for a written line-item quote on your specific openings. The price we give you before the work starts is the price on the final invoice.
Book Your CGI Service in Houston, TX
If you have fogged CGI glass, a sagging Targa door, or an opening that leaked during the last storm, call (940) 289-7658. We’ll schedule a diagnosis, give you a written price, and stand behind the work for a full year after it’s done.
Written by Curtis Lane, Owner at Bradford Remodeling Co Houston, serving Houston since 2004.
