Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Kitchen Remodeling: The Houston Owner’s Guide
A full Cover kitchen remodel in Houston typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and whether walls or plumbing move. We stock and install Cover-compatible cabinetry, hardware, and fixtures, and most tear-out and replacement work is completed within 4 – 8 weeks once materials land. Most Houston homeowners discover their kitchen has failed when cabinet doors no longer close square, drawer glides bind, or the finish on the frames starts peeling back from moisture that crept in behind the sink base.
Houston humidity is hard on kitchens. A door frame that swelled last summer never quite returns to true, and once the substrate behind a sink cabinet has taken on water, the box itself is compromised. That’s when the real conversation starts: patch it, or rebuild the run. We give you a straight number for either path before any demo starts.
Which Cover Models This Applies To
Cover cabinetry runs on several box configurations, and the hardware spacing differs between series. The part that matters most is the hinge bore pattern and the drawer glide length. Cover’s standard overlay cabinets use a 35mm cup hinge with a 1/2-inch overlay, but their inset line uses a completely different plate. If you swap a door from an overlay cabinet onto an inset box, it will not seat, no matter how many times you adjust the screw. We match the replacement part to the original bore pattern before ordering so the door lands flush the first time.
For countertops, Cover-specific edge profiles are worth noting. A mitered edge from one fabricator will not always match the seam line of an original Cover install, especially on islands where two slabs meet. If you’re replacing a damaged run, we template the existing profile so the new piece reads continuous with what stays. On the OEM-versus-aftermarket question, we spec OEM Cover hardware when the cabinet run is less than five years old and the finish still matches. On older kitchens where the original finish has aged, a quality aftermarket hinge in the same bore pattern often blends better than a bright new OEM part against sun-faded frames. We’ll show you both options with prices before we order anything.
We also stock and install compatible parts for KraftMaid, Cambria, and Silestone kitchens, so if your Cover cabinet run shares a wall with a mixed-brand island, we handle the whole scope in one visit.
Styles & brands we work with
Signs Your Cover Kitchen Remodeling Is Failing
- Cabinet doors won’t stay closed or sit proud of the frame. The hinge plate has loosened from the substrate, or the door has absorbed enough Houston moisture to warp past the point of adjustment. If the frame itself is soft, the repair is structural, not hardware.
- Drawers bind partway open or scrape on the face frame. The glide has worn a flat spot, or the drawer box has swollen in high humidity. In Houston, this usually shows up first in the lower cabinets near the dishwasher, where warm, moist air vents out with every cycle.
- The finish is peeling or bubbling along the bottom rail of the sink base. That’s water intrusion behind the finish, and it means the substrate has been wet. Replacing just the door is cosmetic; the box needs attention or the problem returns in a season.
- Countertop seams have opened or the slab has shifted at the joint. Houston’s clay soil moves, and older homes settle. If the cabinets below have racked, the countertop tells you first with a visible seam gap or a cracked backsplash grout line.
- Soft-close mechanisms slam or stop working entirely. The damper inside the hinge cup is spent. On older Cover cabinets, these fail in clusters, which is why we replace them in sets rather than one at a time.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Houston, here’s where pricing lands for the work we do most often on Cover kitchens:
- Cabinet door and hinge replacement: $400 – $1,300 per run, depending on door count and whether frames need reinforcing
- Drawer glide replacement (full set): $200 – $600 installed
- Sink base cabinet rebuild: $900 – $2,500, including new substrate, door, and moisture barrier at the base
- Countertop run replacement (Cover edge profile matched): $2,000 – $6,500 installed, slab-dependent
- Full kitchen remodel (Cover cabinetry, countertops, backsplash, plumbing tie-ins): $14,000 – $45,000, scope-dependent
Every quote is a written line-item number before work starts. No numbers move at the door. The written price includes parts, labor, disposal, and the site left clean. Every completed job carries our 365-Day Done Right Promise: if the work fails inside a year, we come back and correct it at no charge. Straight scope, straight number – that’s the whole conversation.
DIY or Call Us?
You can safely check hinge tightness, drawer glide alignment, and whether visible water staining is active or old. What you should not do is pull a cabinet base apart if the substrate is compromised, because the cabinet may be carrying countertop weight and cutting the wrong section can drop the slab. Same goes for countertop removal: stone or engineered quartz under tension will crack if you pry from the wrong edge, and a cracked slab is a $2,000 mistake you didn’t need.
If the problem is a loose hinge or a glide swap and you have the original bore pattern, that’s a hardware-store Saturday. If the frame is soft, the seam is open, or the doors no longer square up, call us at (940) 289-7658. We’ll send a background-checked, uniformed technician to look, measure, and hand you a written number for the fix. The estimate costs you nothing.
FAQs
How long do Cover kitchen cabinets last in Houston?
With Houston’s heat and humidity, a well-installed Cover cabinet run typically lasts 15 – 25 years, but the hardware often needs replacement around year 8 – 12, and sink bases may need rebuilding sooner if a leak goes unnoticed. Call (940) 289-7658 and we’ll assess your specific kitchen and give you an honest lifespan outlook.
Can you repair my existing Cover cabinets instead of replacing them?
Yes. We rebuild sink bases, re-hang doors, replace glides, and match finishes when the structure is sound, and we tell you plainly when the box is too far gone for a repair to make sense. Call (940) 289-7658 for a written repair quote.
How long does a Cover kitchen remodel take in Houston?
Most full Cover kitchen remodels in Houston take 4 – 8 weeks from tear-out to final walkthrough, depending on whether plumbing or electrical moves and how long the slab or cabinetry takes to arrive from the fabricator. Smaller repairs, like hinge or glide replacement, are often done in one visit.
Do you stock Cover-compatible parts on the truck?
We carry common Cover hinge, glide, and hardware stock on our trucks for one-visit repairs, and we order series-specific parts with the exact bore pattern and finish matched before we open a wall. If your part is in stock, it goes in same-day.
Call (940) 289-7658 for a free estimate on your Cover kitchen remodel or repair in Houston. A live person answers, and you’ll get a written price before any work starts.
Written by Curtis Lane, Owner, Bradford Remodeling Co Houston at Bradford Remodeling Co Houston, serving Houston and nearby areas.
