Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Houston Homeowners Choose CWS Construction
Bradford Remodeling Co Houston provides independent CWS repair in Houston and roof repair service across Houston, Texas, with the same written-price and workmanship guarantee we bring to every remodel, roof, and exterior job. CWS metal and tile roofing systems are popular in Houston for good reason: they handle the heat, humidity, and storm cycles better than most products. But when they fail, they fail in predictable ways that we diagnose and fix every week. Call (940) 289-7658 for a free estimate on any CWS repair or installation.
We are not authorized by or affiliated with CWS. We are an independent Houston remodeling and roofing company that works on CWS products because our crews know the panels, clips, sealants, and failure points after more than a decade of Houston installations and repairs. That independence means we recommend what actually holds up, not what a manufacturer’s program tells us to push. Curtis Lane runs our Houston operation, and he reads a CWS metal roof spec the way other people read a box score.
Why Trust Bradford Remodeling Co Houston for Your CWS Construction?
Houston’s climate punishes exterior products. Three consecutive months of 95-degree heat followed by a tropical storm cycle exposes every weakness in a roofing system, and CWS metal and tile roofs have specific vulnerabilities that only show up after a few wet seasons. Our crews know those vulnerabilities by name. We know where galvanic corrosion starts on a CWS standing seam panel, what clip spacing prevents thermal buckling on a July afternoon, and what underlayment failure looks like after a Bellaire gutter seam tears open in a downpour.
Curtis earned his carpentry and construction management credentials through Los Angeles Trade-Technical College and has been running crews in Houston for over a decade, including CWS Construction in Jersey Village, TX. He keeps a worn copy of the local building code on his truck’s center console, and his crew finds that equal parts admirable and maddening. That discipline shows up in how we handle CWS repairs: the written scope lists the gauge of metal, the clip type, the sealant spec, and the warranty term before any tool comes out. Straight scope, straight number – that’s the whole conversation.
Every CWS job we take on receives a written price before work starts, and every completed project carries our 365-Day Done Right Promise in writing. If the repair or installation does not hold within the guarantee period, we return and correct it at no charge. That guarantee covers our CWS panel replacement, seam sealing, gutter work, and underlayment repair, and we hand you the signed document at job close.
Styles & brands we work with
Common CWS Construction Problems We Fix in Houston
These are the failures we see most often on CWS systems in Houston, and they are almost always traceable to installation shortcuts or material mismatch, not manufacturing defects.
- Galvanic corrosion on CWS metal roof panels. CWS panels are coated steel or aluminum, but when an installer uses bare steel fasteners or mismatched flashing, the dissimilar metals create a small electrical charge. Add Houston’s humidity and the panels start corroding around the screw heads within two or three years. We pull the bad fasteners, isolate the metals with the correct grommets, and replace any compromised CWS panel sections.
- Thermal expansion buckling on CWS standing seam roofs. CWS standing seam panels are designed to expand and contract with temperature swings, but only when the clips are spaced to the manufacturer’s spec. Houston goes from a 45-degree January morning to a 102-degree August afternoon, and a roof with clips too tight or too loose will buckle along the seam. The repair means re-clipping the affected runs, not just pushing the panel down.
- Wind uplift and sealant failure along CWS tile roof valleys and hips. Houston thunderstorms bring straight-line winds that test every seal on a tile roof. CWS tile valleys depend on sealant and overlap, and when the sealant degrades in the heat or a storm lifts the tile edge, water gets under the system. We remove the broken tile, inspect the underlayment, and re-set with a sealant rated for our climate.
- Underlayment degradation and leaks at CWS gutter end caps and seams. Houston averages about 50 inches of rain a year, much of it in short, hard bursts. CWS gutter systems move a lot of water fast, but the end caps and seams are the weak points. When the factory sealant dries out, water drips down the fascia and finds the underlayment. We replace the caps, re-seal the seams with a high-bond product, and check the run’s slope while we’re at it.
- Punctured underlayment from oversized fastener slots. This is an installation error we see often on CWS metal roofs. When the original crew used fastener slots that are too large, or skipped the rubber grommets, the metal slides during temperature changes and cuts into the underlayment below. The roof then leaks even though the metal looks fine from the ground. We identify the puncture points by tracing water stains and fixing the panel mounting correctly.
CWS Parts & Our Repair-vs-Replace Approach
When a CWS roof is still under factory warranty, or when matching existing panels matters for a partial repair or extension, we use genuine CWS sheet metal coil, clips, and fasteners. The color profiles match, the gauge matches, and the manufacturer’s warranty stays intact. For older CWS systems where OEM parts are discontinued or backordered for months, we source code-approved, gauge-matched aftermarket metal and high-bond sealants that preserve the roof’s structural performance without pretending to be something they are not.
Our repair-vs-replace logic is simple, and we’ll put it in writing: if the damaged section is isolated and the surrounding panels are sound, we repair. If the corrosion or storm damage has compromised the underlayment across a large area, or the panel profiles will not match after repair, we price the replacement honestly against the repair cost and let the numbers drive the decision. Call (940) 289-7658 to have us look at your CWS roof and give you both numbers in writing.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We walk the roof or job site, document every failed CWS panel, seam, clip, and underlayment section with photos, and trace the water path. In Houston’s humidity, staining is not always where the leak starts, so we trace it rather than guessing.
- 2
Written scope and price. You get a line-item scope that names the CWS material gauge, clip spacing, sealant spec, and labor cost. The price does not move once you approve it.
- 3
Repair or installation. Our background-checked, uniformed crews perform the work using CWS-compatible or OEM parts as the scope specifies. We protect the job site and leave it clean.
- 4
Testing. For roof work, we water-test repaired seams and check panel clip engagement. For gutter work, we run water through the system and confirm slope and discharge.
- 5
Walkthrough and guarantee. We walk the finished work with you, confirm the scope is complete, and hand you the signed 365-Day Done Right Promise before we leave the property.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Houston
We service and install CWS Metal Roofing Panels, CWS Standing Seam Metal Roof systems, CWS Tile Roofing Systems, and CWS Gutters and Accessories. We keep code-approved, gauge-matched metal coil, seam sealants, replacement clips, grommets, and CWS-compatible gutter components in local stock so a common repair does not wait on a distributor. For full standing seam or tile installations in Houston, we order the system to the project spec and schedule delivery before the demo starts.
We Also Service These Brands
Bradford Remodeling Co Houston is a multi-brand shop offering General Contractor services. Alongside CWS work, we install and service KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, which means we can handle the full exterior and interior scope of a Houston remodel without handing you off between contractors.
FAQs – CWS Construction Service in Houston
No. We are an independent Houston remodeling and roofing contractor, not a CWS-authorized dealer or warranty station. What that means for you: we recommend the repair that will actually last in Houston’s climate, not the repair a manufacturer program tells us to sell. Our 365-Day Done Right Promise backs our CWS work in writing.
Yes, when the project requires it. For CWS systems under factory warranty, or when a partial repair needs to match an existing panel color and profile, we use genuine CWS coil, clips, and fasteners. For older CWS systems where OEM parts are discontinued, we use code-approved, gauge-matched aftermarket metal and high-bond sealants. We document which parts go into the scope before work starts.
Yes, in most cases. CWS metal panel profiles and color selections change over the years, but we can order matching CWS coil for current production runs, and for older profiles we keep a library of local suppliers who can bend gauge-matched panels to the original spec. We will tell you before we quote if a color cannot be matched closely enough to be acceptable.
That is typically galvanic corrosion from incompatible fasteners or missing grommets. The original installer likely used bare steel screws or skipped the isolating washers, and Houston’s humidity turned the contact points into a battery. The fix is pulling the fasteners, cleaning the panels, installing isolating grommets with the correct CWS-compatible screws, and treating the affected areas. Call (940) 289-7658 for an inspection and a written repair price.
In many Houston hail events, CWS standing seam panels can be repaired rather than replaced. Metal roofs dent but often maintain their structural integrity and water-shedding ability. We inspect the panel clips, seam integrity, and underlayment rather than assuming hail means replacement. If the underlayment is pierced or the clips are fractured, a localized panel replacement usually handles it. Call us for a hail-damage inspection and a straight repair-or-replace recommendation.
We replace the failed end caps or corner joints, re-seal the seam with a high-bond sealant rated for Houston’s wet seasons, and check the gutter’s slope and bracket spacing. A CWS gutter seam that keeps pulling apart usually indicates undersized brackets or a sagging run, and re-sealing alone will not hold. Call (940) 289-7658 and we’ll inspect the full run and quote the fix in writing.
CWS metal and tile roofing work in Houston typically runs from $400 for a minor metal roof repair up to $40,000 for a full standing seam installation. The table below shows the market-calibrated ranges we use for CWS-related work in Houston. Your exact price depends on roof size, pitch, tear-off needs, and the CWS system you choose, and we put that number in writing before any work starts.
| CWS Service | Houston Price Range |
|---|---|
| Standing Seam Metal Roof Installation | $15,000 – $40,000 |
| Metal Roof Repair | $400 – $1,800 |
| Gutter Replacement (CWS-compatible) | $3,500 – $9,000 |
| Roof Replacement (CWS metal or tile) | $8,000 – $20,000 |
Yes, in most cases, but only when the existing decking and structure are sound. Houston code allows metal-over-shingle installations when the roof framing can handle the added weight and the shingle layer is not trapping moisture. We inspect the deck from inside the attic and walk the existing roof before we recommend this route, because a hidden deck problem will fail a new CWS system. The written scope will list the inspection findings and the structural confirmation before we proceed.
Book Your CWS Service in Houston, TX
If your CWS roof, panels, or gutters are failing, call Bradford Remodeling Co Houston at (940) 289-7658. We’ll schedule a free inspection, hand you a written scope and price, and stand behind the work for a full year.
Written by Curtis Lane, Owner at Bradford Remodeling Co Houston, serving Houston since 2004.
