Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Houston Homeowners Choose Dvele Construction
Bradford Remodeling Co Houston provides independent Dvele service in Houston, from True Zero homes in Bellaire to panelized builds in the Heights. We work inside the factory-sealed envelope, the Lunos e2 ventilation system, and the Dvele IQ monitoring platform without tripping performance alarms or voiding the home’s written guarantees. Our crew has been inside Dvele builds since they first appeared in the Texas market, and we treat every wall cut, roof tie-in, and slab penetration as a system decision, not a standalone job. This page covers what we fix, what we charge, and how we keep a Dvele home performing while we work in it.
As an independent Dvele service provider, Bradford Remodeling Co Houston is not affiliated with or authorized by Dvele. We are a Houston remodeling contractor with direct, hands-on experience in these homes. Call (940) 289-7658 for a written, line-item estimate before any work starts.
Why Trust Bradford Remodeling Co Houston for Your Dvele Construction?
Dvele homes are not standard stick-frame construction. The walls are dense-packed and factory-sealed, the ventilation runs through a Lunos e2 heat-recovery ventilator, and the home’s performance is tracked by Dvele IQ sensors. When a remodeler who has never opened one of these walls starts cutting, the first thing that happens is a pressure imbalance. Doors slam on their own. Humidity readings spike. The Dvele IQ panel starts sending alerts that the owner cannot explain. We have seen this enough times in Dvele repair in Sugar Land and across Houston to know the sequence cold.
Curtis Lane, owner of Bradford Remodeling Co Houston, runs crews that have worked inside Dvele Construction in Jersey Village, TX and across the area since the model line entered the Houston market. Curtis earned his carpentry and construction management credentials through Los Angeles Trade-Technical College and has been running Houston job sites for over a decade. He keeps a worn copy of the local building code on his truck’s center console. When we open a Dvele wall, we know which plane is load-bearing, which layer is air control, and which layer is vapor control, because Dvele’s panelized cassettes make those separations explicit. That is the difference between a kitchen remodel that holds a seal and one that does not.
Every Dvele job we take gets a written price before work begins. Every completed project carries our 365-Day Done Right Promise in writing. If the work fails inside that window, we come back and correct it at no charge. No exceptions, no fine-print carve-outs.
Styles & brands we work with
Common Dvele Construction Problems We Fix in Houston
These are the failures we see most often in Dvele True Zero homes and Rooms by Dvele panelized builds across Houston. Each one has a real cause, and each one is fixable if the crew knows what they are looking at.
- Pressure imbalance after a wall cut. When a kitchen or bath remodel breaches the air-tight envelope without re-commissioning the Lunos e2 ventilator, the home’s constant-flow balance is thrown off. Symptoms include doors pulling shut on their own, whistle sounds at interior thresholds, and false Dvele IQ alerts about stale air. The fix is not a bigger fan. It is re-balancing the Lunos e2 settings and re-sealing the cut plane before finish work goes back in.
- Dvele IQ humidity and particulate false alarms after tile or plumbing work. Unsealed grout lines, wet saws run indoors, and sheetrock dust all fool the IQ sensors. The panel will report a humidity condition when the real issue is construction dust still floating through the return path. We clean the sensor optics, re-calibrate against a calibrated hygrometer, and seal the work area before re-commissioning the monitoring loop.
- Wall-mounted cabinetry and floating vanities pulling away. Dvele’s dense-pack insulated wall panels need blocking installed behind the finish surface to carry heavy wall-hung loads. If a previous owner or a handyman hung cabinets straight into the panel skin, the fasteners walk out over time. We cut a clean access pocket, install proper strapping and blocking, and re-mount the millwork so it bears on structure, not insulation.
- Interstitial condensation staining ceilings below bathrooms. Houston’s humidity punishes any remodel that does not match the original vapor control layer inside a panelized wall. We have seen Bellaire and West University Dvele builds with brown staining on the ceiling below a bathroom remodel because the new tile backer was installed without a continuous vapor seal at the cassettes’ seams. The stain is not a roof leak. It is trapped moisture condensing inside the wall cavity.
- Unbalanced Lunos e2 units cycling oddly in humid weather. If one Lunos e2 unit is cleaned or replaced without re-pairing it to its partner unit, the pair stops alternating properly. The home gets stagnant corners. Our techs re-commission both units together, verify the constant-flow settings against Dvele’s original commissioning data, and confirm the heat-recovery core is clear before buttoning the wall back up.
Dvele Parts & Our Repair-vs-Replace Approach
For the envelope and the mechanical room, we default to Dvele-specified or factory-equivalent components. That means Lunos e2 cores, Zehnder duct fittings, Dvele IQ sensor arrays, and the Zoeller pump packages that ship with most Houston Dvele builds. These parts are matched to the home’s original commissioning data, and using off-brand substitutions here is how a sealed home underperforms.
For finish materials like tile, cabinets, and fixtures, we will use industry-standard brands when the original Dvele spec is discontinued or priced beyond reason. A Houston homeowner does not need to pay a premium for a discontinued tile line to keep the Dvele warranty intact. But when a wall cassette is compromised, when the dense-pack insulation has been wetted or the air barrier is torn beyond a simple patch, we tell the owner plainly: replacing the cassette is safer than patching around it. That is the kind of straight answer that keeps a True Zero home performing like one. Call (940) 289-7658 and we will walk you through what your specific home needs.
Our Dvele Service Process – Step by Step
- 1
Diagnostic walkthrough and Dvele IQ log review. We start by reading the home’s own performance history. The IQ platform stores temperature, humidity, and particulate trends. A trained eye can spot a slow envelope leak or a ventilation imbalance before a wall is opened. We cross-check that data against a physical inspection of the affected cassette and mechanical room.
- 2
Written scope and price approval. Straight scope, straight number. We produce a line-item written estimate that names the specific Dvele components involved, the work sequence, and the price. No numbers move at the door. No verbal addendums. The written price is the price.
- 3
Controlled breach and pressure management. If the job requires opening the envelope, we isolate the work area, set temporary negative pressure containment where needed, and re-commission the Lunos e2 system before and after the breach. This is not optional. It is the step that prevents door-slam pressure swings and false IQ alarms during construction.
- 4
Repair or installation with OEM-compatible components. Envelope and mechanical parts are Dvele-specified or factory-equivalent. Finish materials are specified in writing and installed to the home’s original plane logic. Every cut is sealed. Every mount is blocked to structure.
- 5
Post-work testing and re-commissioning. We verify the envelope with a blower door where the scope warrants it, confirm the ventilation balance, and clear any Dvele IQ alerts. Then we walk the home with the owner, show what was done, and hand over the signed 365-Day Done Right Promise document. Clean site, documented scope, signed guarantee in hand. That is what squared away looks like.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Houston
We work inside the full Dvele True Zero lineup, including the curated floor plans that have gone up on urban infill lots around Houston. That covers the panelized wall and floor cassettes from Rooms by Dvele, the Lunos e2 heat-recovery ventilator and Zehnder ductwork, the centralized Zoeller pump packages, and the Dvele IQ health-and-performance monitoring platform. Our most frequent Dvele calls in Houston are full kitchen remodels, full bathroom remodels, and roof replacement or re-installation on True Zero builds where a storm-damaged roof membrane must be tied back into the sealed envelope without breaking the performance contract.
Locally we carry sealants, tapes, and fasteners matched to Dvele panel assemblies, plus the consumables needed to re-commission Lunos e2 units and re-calibrate IQ sensors. Larger components like replacement cassettes are ordered per spec, with lead times confirmed in writing before the job is scheduled.
We Also Service These Brands
Bradford Remodeling Co Houston is not a single-brand shop, but a full-service General Contractor. We work with documented material lines including KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures, plus the broader Garrison Standard brand set: Moen, GAF, James Hardie, Therma-Tru, Belgard, and others. If your Houston home carries a mix of Dvele systems and conventional finish brands, one crew handles the whole scope.
FAQs – Dvele Construction Service in Houston
Yes, but only with controlled containment and re-commissioning of the Lunos e2 ventilation before and after the breach. An uncontrolled cut throws the home’s pressure balance off, causing door-slam swings and false Dvele IQ alerts. We isolate the work area, make the cut clean, seal the new plane, and confirm the ventilation balance before finish work resumes. Call (940) 289-7658 for a written scope on your specific wall.
Usually because construction moisture and unsealed grout lines are feeding the sensor a false reading, or because the vapor control layer was broken and humid Houston air is condensing inside the wall cavity. We re-calibrate the IQ sensors against a calibrated hygrometer, dry the cavity, and re-seal the vapor plane to Dvele’s original logic. If the reading is real, we find and fix the actual leak path.
It can be, and the price should reflect that honestly. Dvele homes carry sensor wiring, ventilation ducting, and envelope pressure logic that a conventional kitchen remodel never has to account for. A kitchen remodel in a Houston Dvele True Zero typically runs $14,000 to $45,000 depending on cabinet scope, surface choices, and how much of the sealed envelope has to be opened. The written estimate includes the containment and re-commissioning work, so there is no surprise line item later.
| Dvele Service | Houston Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Replacement | $8,000 – $20,000 |
Only if the contractor understands how the roof ties into the Dvele envelope’s air and vapor control layers. A standard re-roof that does not re-seal the eave and ridge transitions to the panelized wall cassettes will open air paths the home was not built with. We replace Dvele roofs in Houston with the tie-in details spelled out in the written scope, so the sealed envelope stays sealed and the ventilation balance does not shift. Roof replacement on a Dvele home runs $8,000 to $20,000 depending on membrane type and deck condition. Call (940) 289-7658 for an exact number.
That is a pressure imbalance. Even a small envelope breach changes the home’s constant-flow balance, and the front door is usually the most visible symptom. The Lunos e2 pair needs to be re-commissioned and the cut plane re-sealed. It is a quick fix when caught early. Left unaddressed, the imbalance pulls humid outdoor air through every small gap in the envelope, and Houston humidity does the rest.
It depends entirely on the scope. A small seal repair or Lunos e2 re-commissioning is a service-call level job, typically a few hundred dollars. A full kitchen remodel inside a Dvele True Zero runs $14,000 to $45,000. A roof replacement tied back into the sealed envelope runs $8,000 to $20,000. Every job gets a written line-item price before any work starts, so the number you approve is the number you pay. Call (940) 289-7658 to schedule a free estimate.
Book Your Dvele Service in Houston, TX
If you own a Dvele home in Houston and need a remodel, repair, or re-roof done without tripping the home’s performance alarms, call Bradford Remodeling Co Houston at (940) 289-7658. We answer live, we write the price down before we start, and we stand behind the finished work for a full year. Written estimate first, every time.
Written by Curtis Lane, Owner at Bradford Remodeling Co Houston, serving Houston since 2013.
