Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Houston Owner’s Guide
KraftMaid kitchen remodeling in Houston typically runs $14,000 to $45,000 installed, depending on whether you’re replacing individual cabinets, reworking a full run, or gutting the room to the studs. Bradford Remodeling Co Houston stocks KraftMaid-compatible hardware, hinges, drawer slides, and trim on our trucks, so a failing part gets matched and fixed without a three-week wait on a factory shipment. Most homeowners discover the problem the same way: a drawer that catches, a door that won’t stay square, or a hinge that’s sagged so far the door scrapes the frame every time it opens.
Houston humidity is hard on cabinetry. We see it every week: wood doors swell in the summer, joints separate in the winter, and anything that wasn’t sealed properly starts showing it within two or three years. If you’ve got a KraftMaid kitchen that’s failing in one spot, the question isn’t whether to fix it. It’s whether the fix is a part, a section, or a full remodel. This page walks you through that call without the sales pitch.
Which KraftMaid Models This Applies To
KraftMaid builds across several lines, and the parts are not all interchangeable. The Venicia line uses a frameless, full-overlay construction with different hinge plates than the more common framed lines like Lexington, Durham, or the standard KraftMaid cabinetry sold through big-box retailers. If your cabinet door is inset, you need a different hinge entirely than a full-overlay door. That distinction causes more wrong-part orders than anything else we correct on a first visit.
Here’s how to identify what you have before anyone quotes you a number. Open a cabinet door and look at the hinge plate screwed into the cabinet box. KraftMaid stamps most hinges with a manufacturer code, usually Salice, Grass, or Blum depending on the production year. Older KraftMaid runs from the 1990s and early 2000s used Grass hinges almost exclusively. Newer production shifted to Blum hardware, which is a different mounting pattern on the door cup. You can’t swap one for the other without redrilling, and redrilling a finished door is a good way to split the veneer. We match OEM KraftMaid parts when the cabinet box is still square and worth keeping. If the box is water-damaged or the frame has pulled away from the wall, the right call is usually a new cabinet section, not more hardware.
Bradford Remodeling Co Houston is an independent remodeling contractor, not a KraftMaid dealer or factory service center. That matters because we’re not locked into one parts channel. We stock both OEM KraftMaid replacements and quality aftermarket equivalents from the same manufacturers KraftMaid uses. Same specs, no factory wait.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Doors that won’t stay closed or aligned. The hinge is worn past adjustment. KraftMaid hinges have a limited range of travel. Once they’re maxed out and the door still sags, the hinge body is done. Replacing the hinge takes about ten minutes per door.
- Drawers that stick, wobble, or drop on one side. The drawer slide has failed or the glide mounted to the cabinet floor has pulled loose. KraftMaid drawers on older lines used epoxy-coated steel slides that rust in Houston’s humidity. Newer ball-bearing slides last longer but still fail when a drawer gets overloaded.
- Water staining or swelling at the sink base or dishwasher opening. This is the most common failure point in any Houston kitchen. The substrate under the laminate or veneer absorbs moisture, swells, and the cabinet starts crumbling at the bottom. A swollen sink base usually means the cabinet itself needs replacement, not just a door or hinge.
- Gaps opening at the crown molding or toe kick. The house is settling, or the cabinet run was installed without proper shimming. This isn’t always a part failure, but it’s a sign the install wasn’t squared away. Left alone, gaps at the top mean the cabinet box is carrying weight unevenly, which leads to hinge and door failures down the line.
- Soft-close mechanisms slamming shut. The damper inside the hinge or slide has lost its oil. KraftMaid’s soft-close hinges use a sealed piston that eventually wears out, usually after five to eight years of daily use. A replacement hinge is the fix, and it’s a cheap one.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what we charge in Houston, with a written line-item price before any work begins. No numbers that move at the door.
| Scope | Houston Installed Price |
|---|---|
| Single hinge or drawer slide replacement (per piece, parts included) | $45 – $120 |
| Full door and hardware refresh (hinges, slides, pulls, realignment, 10 – 20 openings) | $800 – $2,500 |
| Single cabinet box replacement (sink base, drawer stack) | $600 – $1,800 |
| Partial kitchen remodel (cabinet section, countertop on that run) | $9,000 – $20,000 |
| Full KraftMaid kitchen remodel (cabinets, countertops, backsplash, island) | $14,000 – $45,000 |
Parts are billed at our cost plus a fixed markup, and you see that math on the written estimate. Labor is quoted as a line item, not buried. What drives the price range is the size of the cabinet run, whether the countertop has to be pulled to reach a cabinet box, and whether the KraftMaid line you have is still in production or a discontinued series that needs a matched fill piece built. Every job closes with a signed 365-Day Done Right Promise in your hand. If the hinge, slide, or cabinet work fails inside that full-year window, we come back and correct it at no charge.
DIY or Call Us?
A hinge swap on a cabinet door is within reach for a patient homeowner with a Phillips screwdriver and a steady hand. What’s not worth doing yourself is anything involving a cabinet box, a countertop, or a drawer slide that’s riveted to the box. Those go wrong in ways that turn a $120 repair into a $1,800 cabinet replacement. Here’s the honest split.
You can check the hinge brand stamped on the plate, see if the door is inset or full-overlay, and measure the door cup size. That tells you exactly what part you need. What you shouldn’t do is redrill hinge cups, pull a sink base apart, or try to shim a settled cabinet run without knowing what’s behind it. Houston homes carry plumbing, wiring, and gas lines through kitchen walls, and a slipped drill bit in the wrong spot is a much bigger invoice than the part you were trying to save money on. If any part of the job touches a cabinet box or a countertop, call us at (940) 289-7658. We’ll match the KraftMaid part, give you a written price, and have it installed without the guesswork.
Straight scope, straight number. That’s the whole conversation.
FAQs
KraftMaid cabinets in Houston typically last 15 to 25 years with proper installation and ventilation, but hinges and drawer slides wear out every 5 to 10 years under daily use. Houston’s humidity shortens that lifespan when cabinets aren’t sealed at the edges or when the kitchen lacks proper ventilation, causing laminate to peel and substrate to swell years before the cabinet box itself fails. Call (940) 289-7658 for a free inspection if you’re seeing delamination or persistent door misalignment.
A soft-close damper that slams shut cannot be repaired; the sealed piston is worn and the hinge gets replaced as a unit, which costs $45 to $120 installed per piece. A misaligned door without a worn hinge can usually be corrected with adjustment screws and realignment, and that’s included in our standard labor rate. Have your hinge brand code handy when you call (940) 289-7658, and we’ll tell you if it’s a $10 part or a $120 part before anyone shows up.
A single hinge or drawer slide swap takes 10 to 30 minutes per piece, and a full door-and-hardware refresh on an average Houston kitchen takes half a day to one full day. If a cabinet box has to be ordered because it’s water-damaged at the sink base, expect one to three weeks depending on whether we’re matching a current KraftMaid line or building a fill piece for a discontinued series. Call (940) 289-7658 for an exact timeline on your specific cabinet, and the estimate is free.
We stock common KraftMaid hinges, drawer slides, and mounting plates on our trucks for the lines we see most often in Houston, so a single hinge or drawer repair is usually done the same visit. Discontinued KraftMaid series or unusual door cup sizes may require ordering a matched aftermarket equivalent, and we’ll tell you before you commit so the wait is clear. Call (940) 289-7658 with your hinge code and we’ll check the truck before we schedule the visit.
Written by Curtis Lane, Owner, Bradford Remodeling Co Houston at Bradford Remodeling Co Houston, serving Houston and nearby areas.
