Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Houston Homeowners Choose Mr-Glass Construction
Bradford Remodeling Co Houston provides independent Mr Glass repair in Houston, specializing in frameless shower enclosures, walk-in shower builds, and tub-to-shower conversions, specializing in frameless shower enclosures, walk-in shower builds, and tub-to-shower conversions. We’re not affiliated with the manufacturer, but we’ve torn down and rebuilt enough Mr-Glass enclosures to know their hardware, glass tolerances, and what fails first in Houston’s humidity and shifting clay soils. Call (940) 289-7658 for a written, line-item estimate before any work starts.
Mr-Glass makes a solid enclosure. We say that as a crew that also works with a half-dozen other glass and framing manufacturers. The reason we keep servicing Mr-Glass instead of steering every customer toward a full replacement is simple: most of the failures we see are in the hardware and the seals, not the tempered glass. Rollers bind. Hinges sag. Silicone separates at the curb. Those are fixable, and they should be fixed before anyone quotes you four figures for glass you don’t need.
Houston is hard on shower enclosures. The humidity works on every metal component. The expansive clay under the slab moves, and the enclosure moves with it. We’ll get into those failure patterns below, but the short version is this: if your Mr-Glass door scrapes, leaks, or jumps the track, we can usually repair it same-week with OEM-spec parts. If the glass itself is chipped or the track is bowed, we’ll tell you straight and quote a replacement. Either way, the price is written down before we touch anything.
Why Trust Bradford Remodeling Co Houston for Your Mr-Glass Construction?
Our owner, Curtis Lane, runs crews the way he was taught at Los Angeles Trade-Technical College: read the scope, find what’s actually failing, and quote the fix, not the upsell. He’s been running jobs in Houston for over a decade, from gut-rehab kitchens in Montrose to full structural repairs after storm season. His crew knows that a Mr-Glass neo-angle enclosure has different hinge geometry than an inline panel, and that you don’t swap one for the other without checking the curb height first.
What that means for your Mr-Glass project is straightforward. We identify the exact series and hardware generation before ordering anything. Mr-Glass has changed roller assemblies and hinge block designs over the years, and mixing generations is how doors end up out of square. We stock the common OEM-spec rollers, hinges, seals, and glass-to-glass clamps for the Frameless Sliding, Hinged Inline, and Neo-Angle lines. When a discontinued run shows up, we source high-grade aftermarket equivalents that match the glass thickness and drilled-hole pattern. We don’t improvise. We don’t drill new holes in tempered glass. The panel either fits the hardware or it gets replaced.
Every Mr-Glass repair and installation from Bradford Remodeling Co Houston carries the 365-Day Done Right Promise. If the work fails inside that window, we return and correct it at no charge. The guarantee is written, signed, and handed to you at close. It is not a verbal assurance.
Beyond the glass work, Bradford Remodeling Co Houston is a General Contractor. We’ve installed KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures in hundreds of Houston homes. That matters for Mr-Glass customers because a shower enclosure doesn’t live in isolation. If we’re converting a tub to a walk-in shower, we’re also handling the pan, the waterproofing, the tile substrate, and the fixtures. One crew, one written scope, one guarantee.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Houston
- Roller assemblies binding and jumping the track on Mr-Glass Frameless Sliding doors. Houston’s hard water leaves mineral deposits in the bottom rail. Those deposits build up until the rollers can’t travel cleanly. The door starts to skip, then jumps the track entirely. We pull the rollers, clean or replace the assemblies with OEM-spec Mr-Glass hardware, and re-set the door so it travels without resistance.
- Hinge blocks loosening on Mr-Glass Hinged Inline doors, causing sag and threshold scraping. The hinge blocks on hinged inline doors carry the full weight of a tempered panel. Over time, thermal expansion and normal use work the mounting screws loose. The door drops a quarter inch, then half an inch, until the strike edge scrapes the curb. We re-set the panel, torque the hinge blocks to spec, and replace any worn pivot hardware.
- Silicone seams separating along Mr-Glass fixed panels after slab settling. Houston sits on expansive clay. When the slab moves, the curb moves with it, and the silicone bond between panel and curb breaks. The result is a slow leak at the bottom corner that looks like a caulk problem but is really a substrate problem. We remove the old bead, check the curb for level, and re-seal using a marine-grade silicone rated for movement. If the curb has dropped more than a quarter inch, we’ll recommend resetting the panel before re-sealing.
- Glass-to-glass clamps cracking on Mr-Glass inline and return panels. Overtightening during installation or thermal expansion in an unconditioned Houston bathroom stresses the clamp bodies. Tempered glass edges don’t flex. The clamp or the gasket takes the stress instead. We replace cracked clamps with matched Mr-Glass hardware and torque to the manufacturer’s spec, which is less than most people think.
- Bottom pivot seizing on Mr-Glass Neo-Angle enclosures. The neo-angle design rides on a bottom pivot that catches water, soap, and mineral deposits every time someone takes a shower. Left alone, the pivot seizes and the glass rests on the curb instead of the hardware. On a Heights bungalow remodel, our tech found exactly that. We sourced a matching Mr-Glass pivot kit, reset the panel, and re-hung the door. No leaks, smooth swing, under half the cost of a new unit.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We use genuine Mr-Glass OEM-spec hardware for repairs whenever the enclosure is structurally sound and the hardware generation is still available. Mr-Glass rollers, hinges, seals, and clamps are built to specific glass thicknesses and drilled-hole patterns. Subbing in generic hardware from a big-box shelf is how you end up with a door that binds in six months or a clamp that cracks the panel edge.
For discontinued Mr-Glass runs, we source high-grade aftermarket equivalents that match the original specs. Same glass-to-metal tolerance, same finish, same load rating. We’ll tell you which one you’re getting and why before we install it.
There are cases where repair is the wrong call. If the tempered glass is chipped at the edge, etched from years of mineral exposure, or the bottom track is bowed, no new roller is going to fix it. We recommend full enclosure replacement in those situations, and we’ll show you the numbers for both paths so the decision is yours. Straight scope, straight number – that’s the whole conversation. Call (940) 289-7658 if you want us to look at your enclosure and give you that number in writing.
Our Mr-Glass Service Process – Step by Step
1. Diagnosis and written estimate. We inspect the enclosure, identify the exact Mr-Glass series and hardware generation, and give you a written line-item price. If it’s a repair, you see the part cost and the labor cost separately. If it’s a replacement, you see the glass, hardware, and installation broken out.
2. Parts sourcing. We pull from our local stock of common Mr-Glass rollers, hinges, and seals first. If we need to order a discontinued part or a specific finish, we’ll tell you the lead time before we start.
3. Repair or installation. For repairs, we remove the old hardware, clean the mounting surfaces, and install the new OEM-spec parts to manufacturer torque. For full installations, we follow the same sequence every time: curb check, bracket placement, panel set, hardware torque, silicone cure time.
4. Testing. Every repair gets a function test: door travel, hinge swing, seal adhesion, and a leak check at the curb. If water moves where it shouldn’t, we don’t call it done.
5. Written warranty. You get the 365-Day Done Right Promise in writing before we leave. If the repair or installation fails inside a year, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Houston
We cover the full Mr-Glass frameless line, including Mr Glass service in Sugar Land: the Frameless Sliding Shower Door Series, the Hinged Inline Shower Door Series, the Neo-Angle Frameless Shower Enclosure, and the Fixed Glass Panel & Return Panel line. We stock common OEM-spec rollers, hinge blocks, pivot kits, glass-to-glass clamps, and seals for these series at our Houston shop, which keeps most repair turns under a week.
Our Mr-Glass work concentrates on three installations: frameless glass shower enclosures, full walk-in shower builds, and tub-to-shower conversions where the Mr-Glass enclosure becomes the glass package.
We Also Service These Brands
Bradford Remodeling Co Houston isn’t a single-brand glass shop. We’re a general contractor that works with KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures across hundreds of Houston remodels each year, including Mr-Glass Construction in Jersey Village, TX. That breadth matters when your Mr-Glass enclosure is part of a larger bathroom or kitchen overhaul. One crew handles the whole scope, and the written guarantee covers the whole job.
FAQs – Mr-Glass Construction Service in Houston
Can you replace just the rollers on my Mr-Glass sliding shower door, or do I need a whole new door? In most cases, yes, you can replace just the rollers. Roller failure on Mr-Glass Frameless Sliding doors is almost always caused by hard water buildup in the bottom rail wearing down the roller assemblies. If the glass is unchipped and the track isn’t bowed, we replace the rollers with OEM-spec Mr-Glass hardware and re-set the door. That typically runs far below the cost of a new enclosure. If the track itself is bowed, a new door becomes the honest recommendation. Call (940) 289-7658 and we’ll tell you which path your door needs.
My Mr-Glass hinged door sags and scrapes the curb. Is that fixable without replacing the glass? Yes, usually. A sagging Mr-Glass hinged door means the hinge blocks have loosened or worn, not that the tempered panel has failed. We re-set the panel, torque the hinge blocks to spec, and replace any worn pivot hardware. If the glass edge has been scraping long enough to chip, that changes the picture, but we won’t know until we inspect it. Estimates are free.
Why is my Mr-Glass frameless shower leaking at the bottom corner even though the glass looks sealed? Houston slab movement is the usual culprit. Expansive clay shifts the curb, which breaks the silicone bond between panel and curb even when the bead looks intact from the outside. We remove the old sealant, check the curb level, and re-seal with a marine-grade silicone built for movement. If the curb has settled significantly, panel reset is the real fix. We’ll check both and give you a written number.
Do you use genuine Mr-Glass hardware for repairs or generic parts? We use genuine Mr-Glass OEM-spec hardware whenever the enclosure is structurally sound and the hardware generation is still available. For discontinued runs, we switch to high-grade aftermarket equivalents that match the original glass thickness and drilled-hole pattern. We’ll never drill new holes in tempered glass to make a wrong part fit. You’ll know exactly what we’re installing and why before we start.
Can you convert my tub into a walk-in shower with a Mr-Glass enclosure, and what does it cost? Yes. We handle the full tub-to-shower conversion, including pan, waterproofing, tile substrate, and the Mr-Glass enclosure package. In Houston, a tub-to-shower conversion with a Mr-Glass enclosure typically runs $3,500 to $10,000 depending on tile scope, fixture upgrades, and whether the existing drain line needs relocating. Call (940) 289-7658 for a written line-item quote.
Is Bradford Remodeling Co Houston authorized by Mr-Glass? No, and we won’t pretend otherwise. We are an independent Mr-Glass service provider. We’ve rebuilt and reinstalled their frameless shower enclosures through hundreds of Houston remodels, which gives us first-hand knowledge of their hardware, glass specs, and mounting quirks, but we have no corporate affiliation with the manufacturer. Our guarantee is our own: the 365-Day Done Right Promise, in writing, on every job.
Book Your Mr-Glass Service in Houston, TX
If your Mr-Glass enclosure is leaking, sagging, or jumping the track, call Bradford Remodeling Co Houston at (940) 289-7658. We’ll inspect it, give you a written estimate, and fix it right the first time. Every job carries the 365-Day Done Right Promise in writing.
Written by Curtis Lane, Owner at Bradford Remodeling Co Houston, serving Houston since 2004.
