







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Home Additions & ADU: The Houston Owner’s Guide
Owens Corning home additions and ADUs in Houston typically run $45,000 – $130,000 depending on square footage, foundation condition, and whether you’re adding living space or a fully independent dwelling. We install Owens Corning insulation, air sealing, and weather barrier systems inside every addition we build. Most Houston homeowners call us after discovering an existing addition has failed: roof leaks at the tie-in point, warped drywall from humidity penetration, or an attic that won’t hold temperature. The problem usually traces back to how the addition was framed and sealed against the original structure, not the Owens Corning product itself.
Which Owens Corning Models This Applies To
Owens Corning doesn’t sell “home additions” as a single product line, but their building science materials show up throughout any properly built Houston addition. The key products are: Owens Corning Insulpink or EcoTouch fiberglass batts, FOAMULAR XPS rigid foam board, Thermafiber mineral wool for fire-rated separations, and WeatherLock self-sealing ice and water barrier. The compatibility check isn’t about a serial number, it’s about matching the insulation’s R-value to Houston’s climate zone (Zone 2A), which calls for R-38 in attics and R-13 to R-15 in framed walls. One gotcha we see constantly: an owner or a previous contractor used Owens Corning batts rated for a colder climate in a Houston attic, thinking “more insulation is better,” but here it traps moisture against the roof deck and creates the exact problem it was meant to solve. Bradford Remodeling Co Houston is an independent contractor that installs Owens Corning products as part of our additions and ADU work; we are not affiliated with Owens Corning Corporation.
Styles & brands we work with







Signs Your Houston Addition or ADU Is Failing
- Water staining at the tie-in point. Where new framing meets existing roof or wall, the joint gets two expanding and contracting structures working against it. In Houston’s wet-dry-wet cycle, a cracked tie-in flashing opens up fast. This is the most common failure we fix inside year one.
- Humidity over 60% despite a running AC. Houston air carries enough moisture to condense inside wall cavities. When Owens Corning batts get saturated, they lose R-value and hold water against the framing. You’ll smell it before you see it.
- Soft or warped exterior walls. In Sugar Land and Katy, we regularly find sheathing that turned to sponge because a weather barrier was skipped or poorly lapped. By the time the paint blisters, the OSB underneath is compromised.
- Mold along baseboards or ceiling corners. This is water traveling through the building envelope. An addition with proper air sealing and insulation doesn’t create condensation points along interior surfaces.
- Temperature swings between original house and addition. If your original home holds 72 degrees and the addition swings 10 degrees either way, the thermal envelope is broken. In Kingwood and The Woodlands, we trace this to undersized batt installation or missed air-sealing at the top plate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full addition replacement costs in Houston run $45,000 – $130,000. That’s the full envelope: framing, Owens Corning insulation, sheathing, weather barrier, and all tie-in work to the existing structure. If you’re rebuilding a failed ADU, plan $90,000 – $220,000, and if it’s a garage conversion that was never properly insulated or sealed, $30,000 – $80,000 gets it right. What drives the number: square footage, whether the existing foundation can carry a second story, and how much of the old work has to come apart before new work begins. Every Bradford Remodeling Co Houston quote is a written price before work starts, and the scope is itemized: what gets removed, what gets installed, what’s included in rough-in, and what’s not. The 365-Day Done Right Promise covers the completed addition in writing: if the work fails inside one year, we return and correct it at no charge. No reprice at the door, no number that moves mid-job.
DIY or Call Us?
You can check a few things yourself: look for water stains at the ceiling-to-wall joint, run your hand along exterior walls for soft spots, and compare humidity readings between rooms. What you shouldn’t do is open up walls or get on a roof to chase a leak. Roof tie-in work on a Houston addition puts you at height, working around electrical and existing structure. One wrong cut into a load-bearing point and you’ve turned a $2,000 repair into a $40,000 problem. Curtis Lane has been reading scopes of work in the Houston market for over a decade, and the addition failures he sees in Montrose and Meyerland follow the same pattern: a handyman patched the symptom, not the envelope. If you want the straight number on your addition or ADU, call (940) 289-7658.
FAQs

A properly framed and sealed addition using Owens Corning insulation and WeatherLock barrier lasts 30 – 40 years before the exterior envelope needs major attention. The insulation itself won’t fail; what fails is the air and water seal around it. In Houston’s climate, we see tie-in flashing and weather barrier seams as the first casualty, usually inside 10 years if the original work was rushed. If it was done right, you’re ahead of the game. Call (940) 289-7658 for an inspection.
Most failed additions can be repaired. If the issue is isolated – a cracked tie-in flashing, a section of wet batt, or a gap in air sealing – we remove the damaged section, dry out the cavity, and rebuild only what failed. Full replacement is a hard call we won’t make unless the framing or sheathing has failed structurally. Written price either way, before any work starts.
A standard 400-square-foot addition takes 6 – 10 weeks from framing to final inspection, depending on what Houston’s weather throws at us. A full ADU runs 12 – 20 weeks. We schedule around rough-in inspections so the city sees the work open, and we won’t rush a pour or a seal because a calendar says so.
We keep standard Owens Corning R-13 and R-15 batts, FOAMULAR board, and WeatherLock membrane on the truck for most calls. Special-order densities or thicknesses get ordered direct from our supplier, usually a 2 – 3 day turnaround in Houston. Alongside Owens Corning, we also work with KraftMaid, Cambria, and Silestone for the interior finishes on addition and ADU work. Call (940) 289-7658 and we’ll tell you if what you need is in the truck today.
Written by Curtis Lane, Owner, Bradford Remodeling Co Houston, serving Houston and nearby areas.


