Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Roofing: The Houston Owner’s Guide
We install and replace PGT roofing systems across Houston, with most full replacements running $8,000 – $20,000 depending on roof size, pitch, and the PGT product line you’re matching. Repairs on individual failed components typically run $400 – $1,800. If your PGT roof is leaking, lifting at the seams, or showing hail damage after a spring storm, you’re likely looking at a targeted repair rather than a full replacement, and we can usually diagnose it in a single visit.
How homeowners find us: water staining on a ceiling after a hard Houston downpour, granules collecting in a gutter, or an adjuster’s report that names a specific failed flashing or underlayment. The part rarely announces itself. The symptoms do. Our job is to trace the symptom back to the exact PGT component, quote the fix in writing, and stand behind it for a full year.
Straight scope, straight number – that’s the whole conversation.
Which PGT Models This Applies To
PGT’s roofing footprint in Houston is narrower than their impact-window and door lines, but the brand’s roof products do show up on custom builds and storm-hardened homes across Harris County. The parts we most often match are PGT metal roof panels and trim, PGT skylight flashing kits, and the sealant and fastener systems specified for PGT roof-to-wall transitions.
The compatibility gotcha on PGT roof components is the profile match. PGT metal panels are roll-formed to specific rib heights and widths, and a panel from one roof line will not seat correctly on a different profile even if it looks close from the ground. Before we order anything, we pull dimensions from the existing panel: rib spacing, rib height, and overall coverage width. If your original paperwork is gone, we measure on-site and match against PGT’s current spec sheets. For aftermarket equivalents, we use only components that match the original profile and gauge, and we’ll tell you plainly when an OEM PGT part is the only responsible choice versus when a vetted equivalent does the same job for less.
Styles & brands we work with
Signs Your PGT Roofing Is Failing
- Water staining on ceilings or walls after heavy rain. The usual cause on PGT roofs in Houston is a failed transition flashing where the roof meets a wall or chimney. Flashing sealant breaks down faster in our heat and humidity cycle than it does in drier climates, and once water gets behind it, the stain follows within weeks.
- Granule buildup in gutters. If your PGT system includes an asphalt shingle component, granules in the gutter mean the shingle surface is degrading. In Houston, UV exposure accelerates that breakdown, and by the time granules are visible in volume, the shingles are usually past the halfway point of their useful life.
- Lifted or flapping metal panels at the roof edge. High winds during storm season work fasteners loose over time. A lifted panel isn’t just noisy; it’s an entry point for wind-driven rain, and the longer it flaps, the more the fastener holes elongate and complicate the repair.
- Rust trails or corrosion at panel overlaps. Houston’s salt air near the coast and our seasonal humidity both accelerate corrosion at exposed metal edges. Once rust starts tracking along an overlap seam, the protective coating is compromised and the affected panel section needs replacement, not just resealing.
- Daylight visible through the roof deck from the attic. This is the one that sends owners to the phone. If you can see light through the deck boards from inside the attic, the roof’s water-shedding layer has already failed. Whatever the material above it is, the fix starts underneath.
Replacement Cost & What’s Included
Here’s what we quote in Houston, in writing, before any work starts:
| Scope | Typical Installed Price |
|---|---|
| Individual PGT flashing or sealant repair | $400 – $800 |
| Single PGT panel or shingle section replacement | $800 – $1,800 |
| Full roof replacement (PGT-compatible system) | $8,000 – $20,000 |
The range moves on roof size, pitch, deck condition, and whether we’re matching PGT components or the roof is going to a full tear-off with underlayment and ventilation upgrades. Every line item is written out before the first tool comes off the truck: parts, labor, disposal, and permit fees when the scope requires one. No numbers move at the door. And every completed job carries our 365-Day Done Right Promise: if the repair or replacement fails within a year, we return and correct it at no charge.
Curtis Lane reads scopes the way other people read a box score, fast and without missing anything in the fine print. We price the job once and we price it straight.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely do: check your gutters for granules, look for visible rust trails from the ground, and inspect your attic for daylight during the brightest part of the day. Those observations help us quote faster.
What you should not do: get on an 8/12-pitch Houston roof in July. Roof work on any PGT system involves height, heat, and usually a steep slope, and a fall from even a single-story eave is a life-changing event. We’ve also seen owners make a small leak worse by applying the wrong sealant over a PGT transition, trapping water behind the repair instead of letting the flashing breathe. If the part in question is a panel, flashing, or underlayment component, cleaning the gutter and calling us at (940) 289-7658 is the responsible sequence.
FAQs
A PGT metal roof in Houston typically lasts 30 – 45 years with proper installation, while PGT-compatible asphalt shingle sections in our climate usually need replacement in 15 – 20 years because UV and humidity degrade the asphalt faster than the manufacturer’s cooler-climate estimates. The deciding factor is almost always installation quality at the transitions, which is where Houston roofs fail first. Call (940) 289-7658 for an honest assessment of your specific roof’s remaining life.
Yes, isolated failures like a single lifted panel, a worn flashing, or a sealant gap are repairable and fall in the $400 – $1,800 range in Houston. If the roof deck underneath shows rot or the failures are spread across multiple sections, a full replacement is usually the cheaper long-term choice. We’ll show you the condition of the deck before you commit to either path.
A single-panel or flashing repair is usually done in one day, while a full replacement on an average Houston home takes 2 – 5 working days depending on roof size and weather. We schedule each job with a written scope and a start date that holds. Call (940) 289-7658 for a timeline specific to your roof.
We stock common PGT flashing profiles, sealants, and fasteners on our service vehicles, and we maintain a documented parts roster that includes PGT-compatible components alongside our other stocked brands like KraftMaid, Cambria, and Silestone. If your repair requires a non-stock PGT panel or specialized trim, we order it directly from PGT’s current distribution channel with a delivery window spelled out in your written quote.
Get Your PGT Roof Fixed Right
If your PGT roof is leaking, lifting, or just looking tired after another Houston storm season, call (940) 289-7658. We’ll schedule an inspection, put the diagnosis in writing with a fixed price, and stand behind the work for a year under our 365-Day Done Right Promise. A live person answers the phone around the clock, not a voicemail queue. The estimate is free, and the number won’t change at the door.
Written by Curtis Lane, Owner, Bradford Remodeling Co Houston at Bradford Remodeling Co Houston, serving Houston and nearby areas.
