Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Houston Homeowners Choose PGT Construction
Bradford Remodeling Co Houston provides independent PGT repair in Houston, construction, and installation service across Houston, TX. We work on PGT WinGuard Aluminum, WinGuard Vinyl, SpectraGuard, and Eze-Breeze product lines, and we understand how these units fail in Houston’s specific conditions: salt air, intense humidity, and hurricane wind loads. We are not an authorized PGT dealer or factory representative. We are an independent contractor whose crews have spent over a decade installing, servicing, and repairing PGT products on Houston homes, and we back every job with the 365-Day Done Right Promise: if it fails within a year, we come back and make it right at no charge. Call (940) 289-7658 for a written estimate before any work starts.
Houston’s combination of Gulf Coast humidity, frequent heavy rain, and hurricane exposure puts real stress on windows and doors. PGT builds impact-rated units designed for that stress, but they are not maintenance-free. Seal failures, track wear, and frame corrosion show up here more than anywhere else in the country. We know which PGT models hold up, which ones develop problems, and what it costs to fix them properly. Curtis Lane, our owner, has been reading scopes of work and running crews in the Houston market for more than ten years, from gut-rehab kitchens in Montrose to full structural repairs after storm season. Straight scope, straight number – that’s the whole conversation.
Why Trust Bradford Remodeling Co Houston for Your PGT Construction?
PGT impact windows and doors are engineered products. They have specific glazing systems, frame extrusions, roller assemblies, and drainage paths. A crew that does not know PGT’s design details can replace a roller with the wrong weight rating, use a sealant that breaks down in Houston humidity, or order a glass pack that does not match the original laminated configuration. Our techs have worked on enough PGT installations in Houston to know the difference between a WinGuard Aluminum unit and a SpectraGuard unit without looking at the label twice. We read the scope the way Curtis reads a code book: fast, accurate, nothing missed in the fine print.
We source PGT factory replacement glass packs when glazing needs to be swapped, because that keeps the window’s impact rating intact and does not complicate the manufacturer’s warranty. For frame hardware – screws, weep-hole covers, roller assemblies – we use marine-grade stainless fasteners and aftermarket components rated for the load. The original zinc screws PGT used on older WinGuard frames are a known corrosion point in Houston’s salt air. Replacing them with stainless is not a shortcut; it is an upgrade the factory should have made from the start. Every PGT job we complete carries our written 365-Day Done Right Promise on top of any remaining manufacturer coverage. That guarantee is in writing before the first tool comes out, and Curtis signs off on every scope personally.
Styles & brands we work with
Common PGT Construction Problems We Fix in Houston
- Fogged glass on WinGuard Aluminum units. The original silicone bedding PGT used on early WinGuard Aluminum frames breaks down after 5 to 8 years in humid Houston air. Once the seal fails, moisture gets between the panes and you get interior fogging that cannot be wiped off. The fix is a factory-spec replacement glass pack, not a drill-and-defog hack. We order the correct laminated pack for the unit’s size and impact rating, pull the old sash, and install the new glass clean.
- Seized or worn rollers on Eze-Breeze sliding panels. Eze-Breeze panels ride on rollers that wear down, especially when spring storms dump grit into the tracks and summer heat expands the aluminum. Panels bind, drag, or pop out of the track entirely. We clean the tracks, replace the roller assemblies with stainless aftermarket rollers rated for 200 pounds, and realign the panel so it slides like it did on day one.
- Corrosion pitting on exposed aluminum frame corners. Older PGT WinGuard installations used zinc-coated screws at the frame corners. In Houston, salty Gulf air and acid rain eat through that coating in a few years. The result is white, chalky pitting around the screw heads and, in worse cases, structural weakening of the corner joint. We replace the zinc fasteners with marine-grade stainless, treat the pitted area, and install weep-hole covers to slow future moisture intrusion.
- Warped or delaminating laminated glass on SpectraGuard units. SpectraGuard windows installed without proper weep-hole drainage trap water at the bottom corners. Over time, that trapped moisture delaminates the laminated glass edge, creating visible bubbles or clouding that cannot be repaired. If the delamination is minor, we may be able to slow it with drainage correction. If the glass edge is compromised, the unit needs a new laminated pack.
- Leaking around window frames after roof replacement. This is a Houston-specific problem we see frequently. A roof crew tears off the old flashing, and the new flashing does not integrate properly with the PGT window’s frame profile. Water finds the gap during the next heavy rain. We fix the integration: proper head flashing, sill flashing, and sealant that holds up under Houston’s heat and moisture. When we replace a roof on a home with PGT windows, we spec the flashing details before the shingles go on.
PGT Parts & Our Repair-vs-Replace Approach
PGT factory parts are the right call for anything that affects the glass or the structural integrity of the frame. That means factory replacement glass packs for WinGuard and SpectraGuard units, and factory sashes when the original is warped beyond repair. For hardware, we are less sentimental. The original zinc screws, standard weep-hole covers, and basic roller assemblies were not designed for Houston’s salt air and humidity. We use marine-grade stainless fasteners and aftermarket weep-hole covers that actually drain. We use stainless aftermarket rollers rated above the panel’s static load so they do not wear out in two seasons.
On older WinGuard Aluminum frames with pitting or a warped sash, we do an honest comparison: what it costs to repair the existing unit versus what a new unit costs installed. Sometimes repair is a $400 roller assembly. Sometimes the frame is so compromised that a new window at $800 per opening is the smarter long-term call. We put both numbers in writing and let you decide. No pressure, no surprise invoice at the door. Call (940) 289-7658 and we will give you the real numbers for your PGT units.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect every PGT unit on the job: glazing seals, frame extrusion, weep-hole drainage, roller assemblies, flashing integration. We document what is failing, why it is failing, and what it will cost to fix. You get one written scope with line-item pricing before any work starts.
- 2
Repair or installation. For repairs, we pull the sash or panel, replace the failed component with the correct PGT-spec part or an upgraded stainless aftermarket part, and reassemble with sealants rated for Houston’s humidity. For new installations, we follow the manufacturer’s installation specs and local wind-load and floodplain requirements. Houston’s lack of zoning means we check adjacent land use and drainage before we set a single anchor.
- 3
Testing. We operate every window and door through its full range. We check for air leaks, water intrusion, binding, and proper drainage. On impact units, we verify the laminated glass is seated correctly and the frame anchors are tight.
- 4
Warranty. You get the 365-Day Done Right Promise in writing: if the repair or install fails within one year, we return and correct it at no charge. That is on top of any remaining PGT manufacturer warranty. The site is left clean, the scope is documented, and the signed guarantee is in your hand before we leave.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Houston
We service and install the PGT product lines most common in Sugar Land and Houston homes. WinGuard Aluminum is the workhorse for impact-rated openings in coastal and inland Houston alike. WinGuard Vinyl offers the same impact protection with lower maintenance on the frame. SpectraGuard units show up on newer construction and remodels where homeowners wanted a specific look without giving up storm protection. Eze-Breeze sliding panels are the choice for enclosed porches and patio rooms. We stock common stainless rollers, weep-hole covers, and fasteners locally so turnaround on hardware repairs is measured in days, not weeks. Factory glass packs are ordered per unit and typically arrive within two to three weeks.
We Also Service These Brands
PGT is a major part of our window and door work, but we are not a single-brand shop. As a General Contractor, our crews install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures across Houston kitchens and baths. That multi-brand capability means we are not trying to sell you a PGT product when a different brand fits the job better. We recommend what the scope calls for, in writing, with a number attached.
FAQs – PGT Construction Service in Houston
Is Bradford Remodeling Co Houston authorized by PGT? No, we are an independent PGT service provider. We are not a factory-authorized dealer or warranty agent. That independence means we repair what needs repairing, not what a sales quota says to replace. We source factory PGT parts when the job calls for them and upgrade hardware when a better material exists.
Why do my PGT WinGuard windows fog up in Houston even though they’re impact-rated? Impact rating is about glass strength, not seal longevity. The silicone bedding on early WinGuard Aluminum units breaks down in Houston’s constant humidity after 5 to 8 years, allowing moisture between the panes. That fogging is a seal failure, not a glass failure. The fix is a factory-spec replacement glass pack, which we order and install without disturbing the frame. Call (940) 289-7658 and we will quote your specific window sizes.
Can you replace just the glass in my PGT SpectraGuard window, or do I need a whole new frame? In most cases, you can replace just the glass pack. As long as the frame extrusion is sound and the weep-hole drainage is working or repairable, the frame stays. If the frame is warped, pitted, or delaminating at the corners, a full unit replacement is the honest call. We give you both numbers in writing and let you decide. Estimates are free.
How do you handle PGT Eze-Breeze sliding panels that keep popping out of the track? Popping panels are almost always a roller problem: worn rollers, undersized rollers, or rollers clogged with grit. We pull the panel, clean the track, replace the roller assemblies with stainless aftermarket rollers rated for the panel’s weight, and realign the panel in the track. If the track itself is bent or worn, we quote a track replacement. Call (940) 289-7658 for a written estimate.
Does replacing my roof affect the warranty on my PGT impact windows? It can, if the flashing work around the windows is done wrong. A roof replacement that fails to integrate the new flashing with the PGT frame profile can cause leaks that void the window’s warranty for water damage. We spec the flashing details before the roof goes on, so the roof and the windows work together. When we handle the roof replacement, the window integration is part of the scope, not an afterthought.
How much does PGT Construction in Jersey Village, TX and Houston cost? Prices depend on the scope, but here are the ranges we see for common PGT-related work in Houston:
| Service | Houston Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
These are installed prices for typical Houston homes, including written scope, materials, and the 365-Day Done Right Promise. For an exact quote on your PGT project, call (940) 289-7658. Estimates are free and the number does not move once it is in writing.
Book Your PGT Service in Houston, TX
If your PGT windows are fogging, your Eze-Breeze panels are binding, or you need impact-rated installation done right before the next storm season, call Bradford Remodeling Co Houston at (940) 289-7658. We will schedule an inspection, give you a written scope with line-item pricing, and stand behind the work for a full year. Curtis Lane and our Houston crews are ready to get your project squared away.
Written by Curtis Lane, Owner at Bradford Remodeling Co Houston, serving Houston since 2004.
