Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Houston Owner’s Guide
Bradford Remodeling Co Houston installs and remodels kitchens built around Tamko product lines, with full kitchen projects in Houston typically running $14,000 to $45,000 depending on scope, cabinetry grade, and rough-in conditions. We carry Tamko-compatible materials on our trucks and match specifications by series and measurement, not by guesswork. Most Houston homeowners call us because a cabinet face has swollen from humidity, a drawer glide has sheared, or a laminate edge has started peeling back after a few Gulf Coast summers.
This page covers what we see in Houston kitchens that were originally spec’d with Tamko products, what fails first, what it costs to make right, and when you should leave the work to a crew that carries written pricing and a one-year guarantee. We’re an independent contractor, not affiliated with Tamko, but we work with their product families daily.
Key Takeaways
- Full kitchen remodels involving Tamko product lines run $14,000 to $45,000 in Houston, with smaller-scope work available below that.
- The biggest compatibility issue is measurement: Tamko cabinet boxes and door profiles vary by series, so a swap requires matching the face frame, not just the color.
- Houston humidity is the number-one killer of laminate edges, cabinet substrates, and drawer glides. Most failures we see are moisture-related, not material defects.
- Every job gets a written price before work starts, and everything we install carries our 365-Day Done Right Promise.
Which Tamko Models This Applies To
Tamko’s kitchen product lines span cabinet systems, laminate surfaces, and trim packages that were sold through several Houston supply houses over the years. The catch for homeowners is that Tamko has not used one universal sizing standard across all series, so a door from one line will not necessarily hang on a box from another. We identify what you have by measuring the face frame width, the hinge bore pattern, and the interior box depth. The label on the inside of a drawer box or the back of a lower cabinet usually carries the series code, and that code matters more than the color name.
Here’s the practical decision: for a straight replacement, an OEM Tamko part keeps your series consistent, but lead times can stretch and pricing runs higher. A quality aftermarket equivalent, cut and finished in Houston, often costs less and can be installed sooner, especially for drawer fronts and end panels. Curtis Lane, who reads a scope of work faster than most people read a menu, will tell you the same thing on-site: if the series is still in production and the match is exact, stay OEM. If you’re replacing multiple boxes or blending a new island into old cabinetry, a custom-fabricated match is usually the better play.
Styles & brands we work with
Signs Your Tamko Kitchen Remodeling Is Failing
- Peeling laminate edges on cabinet doors and drawer fronts. Houston’s humidity and kitchen steam work their way into the substrate, and once the edge banding lifts, moisture gets behind it and spreads fast.
- Swollen or soft cabinet bottoms under the sink. A slow p-trap leak or condensation from Houston’s warm, damp air can go unnoticed for months. By the time the bottom panel flexes, the substrate has already started breaking down.
- Drawer glides that drag, stick, or pop out of alignment. Older Tamko glide hardware was not always sealed against high humidity, and once the ball bearings bind, the glide is done, not fixable with spray lubricant.
- Doors that won’t stay closed or sit crooked in the frame. Hinge plates loosen in the face frame over time, and on some Tamko series the original hinge bore pattern limits what modern hinges you can swap in without drilling new bores.
- Counter seams separating near the cooktop or sink. Laminate and solid-surface seams opened up by heat cycling and water exposure are common in Houston kitchens, especially where the original install ran the seam too close to a heat source.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full kitchen remodel in Houston, whether you’re replacing a failing Tamko layout or rebuilding around it, runs $14,000 to $45,000 through Bradford Remodeling Co Houston. That range covers everything from cabinet installation and countertop replacement to backsplash, island work, and finish plumbing. Smaller-scope jobs land lower: cabinet installation alone runs $4,000 to $13,000, countertop installation $2,000 to $6,500, and backsplash work $800 to $2,500.
What drives the number in Houston is the condition of what’s behind the cabinets: water-damaged drywall, out-of-level subfloors, or old rough-in plumbing that no longer meets code. We spell out parts and labor separately on every written quote so you can see exactly where the money goes. Nothing moves at the door. Every completed job carries our 365-Day Done Right Promise in writing, and if the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can check a few things yourself: read the series label inside the drawer box, measure the face frame and hinge bore pattern, and look for water stains under the sink base. That information saves time when you call. But swapping cabinet boxes, rebuilding wet substrates, or re-hanging doors on failed hinges is not weekend work. The tools are specialized, the measurements have to be exact, and a botched face-frame repair means the next contractor gets to charge you twice for the same wall.
If the job involves electrical for under-cabinet lighting or gas for the cooktop, leave it to a licensed pro. Those are not areas to test your patience with. Call us at (940) 289-7658 and we’ll put a straight number in front of you before any work starts.
FAQs
In Houston’s climate, Tamko laminate cabinets typically last 15 to 25 years before edge banding, drawer glides, or substrate panels start failing, with sink bases usually going first. Moisture exposure shortens that lifespan, so a well-sealed, well-ventilated cabinet run holds up longer. Call (940) 289-7658 and we’ll assess what you have.
Yes, in many cases a peeling edge, a soft sink base, or a bad drawer glide can be repaired if the cabinet box is still square and the face frame is solid. Full replacement makes more sense when multiple boxes are compromised or the series is too far out of production to match. Call (940) 289-7658 for an honest on-site read.
A full kitchen remodel around Tamko product lines typically takes 3 to 8 weeks in Houston depending on scope, permit timing, and what surprises the walls reveal once demolition starts. We provide a written scope with clear milestones before we start, and you’ll know the order of operations. Call (940) 289-7658 to schedule a free estimate.
We keep common sizes of drawer glides, edge banding, and door hardware on our trucks, and we source Tamko-specific or custom-fabricated cabinet components through Houston suppliers with faster turnaround than national channels. If we can’t match it exactly, we’ll tell you before you spend a dollar. Call (940) 289-7658 and describe what you’re looking for.
Written by Curtis Lane, Owner, Bradford Remodeling Co Houston at Bradford Remodeling Co Houston, serving Houston and nearby areas.
