Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Windows & Doors: The Houston Owner’s Guide
If you’re holding a failed Therma-Tru window sash, a warped door slab, or a rotted frame corner in Houston, the installed replacement cost typically runs $450 to $2,800 depending on whether we’re swapping a single sash, re-hanging a door slab, or rebuilding the rough opening. We keep common Therma-Tru door components, weatherstripping, and threshold assemblies on the truck, and we can source the exact replacement for your series inside a few business days. Most owners discover the problem the Houston way: a door that won’t latch after the clay soil shifts, or a window that fogs between the panes after three or four summers of 95-degree heat and 90% humidity. The part didn’t fail overnight. It’s been losing ground for a while. Now you need to know whether it’s worth repairing or replacing, and what the real number looks like before anyone steps on site.
That last part is where we hold the line. Bradford Remodeling Co Houston is an independent service provider, not a Therma-Tru dealer or affiliate. That means we give you a straight price for the part and the labor, written down before we order anything, with no number that moves once the work begins. Curtis Lane built this business around a simple rule: straight scope, straight number, that’s the whole conversation.
Which Therma-Tru Models This Applies To
Therma-Tru builds doors and windows across several series lines, and the wrong part match turns a simple swap into a headache. Here’s what you need to know before you order anything:
- Classic-Craft and Fiber-Classic doors: These are the fiberglass slabs you see all over Houston’s 1990s and 2000s subdivisions. The door slabs are matched to the frame by a stamped part number on the hinge edge. Snap a photo of that stamp before calling anyone. If the stamp is worn off, we measure the slab and the hinge setback to identify it.
- Smooth-Star and Profiles doors: These are the lower-cost compression-molded fiberglass lines. The threshold assemblies and weatherstripping for these are not interchangeable with Classic-Craft parts, even if the door width matches. A homeowner who orders a Classic-Craft sweep for a Smooth-Star door is going to have a drafty Houston garage entry until it’s fixed properly.
- Window sashes and insulated glass units: Therma-Tru’s window lines vary by year, and the glass pack thickness changed across production runs. A 2008 sash will not accept a 2022 insulated glass unit. We measure the glass pack thickness and the sash channel width before we order.
The OEM versus aftermarket decision matters more than most people think. For door sweeps, weatherstripping, hinge shims, and threshold caps, good aftermarket equivalents exist and they save you 20% to 40% without losing performance. But for the fiberglass slab itself, the glazing bead, and the multi-point lock hardware, OEM is the only call. The aftermarket slabs we’ve seen in Houston don’t match the frame profile, and the finish fails faster in our UV and humidity. We’ll tell you which is which without making you guess.
Styles & brands we work with
Signs Your Therma-Tru Windows & Doors Is Failing
Here’s what we see on Houston job sites, week in and week out:
- Door won’t latch or the deadbolt won’t throw. In most Houston homes, this is the slab swelling from humidity or the hinge screws backing out of a soft jamb. It’s repairable. In older homes with clay soil movement, the whole frame has racked and the fix involves resetting the jambs, not just shaving the strike plate.
- Visible light or daylight around the door edges. The weatherstripping has compressed or torn, or the threshold cap has worn through. Houston’s humidity makes worn seals twice as costly because the energy loss is year-round, not just in summer.
- Window fogged between the glass panes. The insulated glass unit seal has failed. Texas heat cycles the seal until it lets go, and once fog appears it will not clear. You either replace the glass pack or live with the cloud.
- Sash won’t stay up, or the crank turns loosely. The balance assembly has failed or the gear mechanism in the crank operator has stripped. On Therma-Tru windows, the balance is a matched pair, so we replace both sides even when only one has failed.
- Soft spots or flaking at the bottom door corners. Water has been wicking into the substrate through a failed seal or missing caulk joint. In Houston’s torrential downpours, a small gap becomes a rot problem inside two seasons. By the time you see the flaking, the structural fill is usually compromised.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here is what installed Therma-Tru window and door work costs in Houston right now:
| Service | Installed Price Range |
|---|---|
| Single window sash or glass pack replacement | $450 – $1,100 |
| Weatherstripping, sweep, and threshold replacement | $250 – $650 |
| Door slab swap (existing frame, same size) | $900 – $2,200 |
| Full entry door replacement within existing rough opening | $1,800 – $3,800 |
| Complete window unit replacement (standard size) | $900 – $2,800 per window |
Those numbers include the part, the labor, the haul-away of the old unit, and the written scope of work. What moves the price within the range is the complexity of the frame condition once we get into it, whether the rough opening needs repair, and whether you’re matching a finish or spec that requires factory ordering. Every Bradford project gets a written price before we start, and that price does not change unless you add scope. If the work fails inside the first year, the 365-Day Done Right Promise means we come back and fix it at no charge. That’s in writing, on every job.
DIY or Call Us?
Door sweeps, weatherstripping, and threshold caps are honest DIY work if you have the right measurements and a Phillips head. You can order the part from a Houston supply house and be done in an hour. But once you’re touching the slab, the glazing, the hinges, or the frame, there are real ways this goes sideways: a mis-shimmed door binds, a glass pack dropped on a tile floor means buying another one, and a threshold installed out of level just funnels water under the door the next time a Gulf storm rolls through. If the part involves a multi-point lock or the door frame itself has moved, call us. We’ll inspect, measure, and quote it the same visit. Call (940) 289-7658 and we’ll schedule a free estimate.
FAQs
In Houston’s heat and humidity, Therma-Tru fiberglass door slabs give you roughly 20 to 30 years of good service, weatherstripping lasts 3 to 5 years, and insulated glass packs fail between 10 and 15 years on west- and south-facing exposures. The sun and the moisture cycle are the killers, not the age alone. Call (940) 289-7658 and we’ll assess what’s worth replacing and what has years left.
Most door seals, thresholds, hinge adjustments, and window balances can be repaired as individual parts; a fogged glass pack or a rotted corner usually means replacing that component. We’ll always price the repair against the replacement and tell you which one makes sense for your situation.
A single sash or weatherstripping job is done in under two hours; a door slab swap is a half day; a full window unit replacement inside an existing opening is a one-day job. If we have to factory-order a non-stock Therma-Tru part, add a few business days on top, and we’ll tell you that timeline in writing before you pay a cent.
We keep common weatherstripping, sweeps, thresholds, hinge sets, and sash balancers on the truck. Unusual slab sizes, custom glass packs, and color-matched finishes get ordered from the local supply channel, and we give you the lead time in the written quote. Beyond Therma-Tru, we also stock parts for KraftMaid cabinetry, Cambria and Silestone surfaces, so the same discipline applies across every brand we touch.
Written by Curtis Lane, Owner, Bradford Remodeling Co Houston at Bradford Remodeling Co Houston, serving Houston and nearby areas.
