Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Houston Owner’s Guide
A Unilock kitchen remodel in Houston typically runs $14,000 to $45,000 installed, depending on scope, material finish, and what’s hiding behind the existing walls. We stock Unilock-compatible components on the truck and can usually begin work within a week of the written estimate. You’ll know something’s failed when you see cracked coping, shifting paver edges, efflorescence blooming across the surface, or a sink run that no longer drains the way it did six months ago.
Most Houston homeowners discover the problem the same way: a paver out of plane near the island base, a joint that’s opened up wider than a quarter inch, or a counter edge that’s started to spall where the morning sun hits it. That’s the Houston climate doing what it does. Heat, humidity, and clay soil movement work on every hard surface eventually. Unilock products hold up better than most, but the substrate underneath is what fails first.
Key Takeaways:
- Installed Unilock kitchen remodel pricing in Houston: $14,000 to $45,000, with a written price before work starts.
- We’re an independent contractor, not a Unilock affiliate. We install and service Unilock-compatible products using OEM and quality aftermarket parts.
- Every job is covered by the 365-Day Done Right Promise: if the work fails within a year, we return and fix it at no charge.
- Call (940) 289-7658 for a free estimate. A live person answers, 24/7.
Which Unilock Models This Applies To
We work with Unilock’s entire kitchen-relevant product line: Richcliff, Beacon Hill Flagstone, Courtstone, Umbriano, and the EnduraColor series. Each has different surface texture and joint dimensions, and the wrong replacement part will be visibly wrong from across the room. Richcliff runs a 3-piece modular pattern with a pronounced chamfer. Courtstone is flatter, tighter-jointed, and reads more formal. Umbriano has a granite-like finish that hides wear better in a working kitchen.
The quick way to identify what you have: flip a loose piece or check the underside for the Unilock stamp with the series name and manufacturing date. If nothing’s loose, take a photo of the surface texture and joint width and email it to us before you call. For OEM parts, Unilock’s availability on older series has tightened in the Houston market. Quality aftermarket equivalents from Belgard and Techo-Bloc match dimensional specs within tolerance and cut lead time from six weeks to about ten days. We’ll give you the OEM option and the aftermarket option in writing, with the price difference, before you choose.
Styles & brands we work with
Signs Your Unilock Kitchen Remodeling Is Failing
- Efflorescence that won’t brush off. A white chalky bloom means water is wicking through the substrate and pushing minerals out. In Houston’s humidity, this is a moisture management problem, not a cleaning problem. The fix is a drainage correction, not a sealer topcoat.
- Paver edges sinking or tilting near the island. Houston clay expands and contracts more than most soils in the country. If the paver base wasn’t compacted to spec, you’ll see differential settlement within the first two years. This is a substrate failure, not a paver failure.
- Joint sand washing out after every rain. Polymeric sand should hold for years. If it’s gone after one storm season, the base is moving or the edge restraint failed. Re-sanding without fixing the restraint means you’ll do it again next spring.
- Cracking at change-of-plane corners. Outside corners and step transitions carry the most stress. A hairline crack at a corner joint is the first sign the substrate shifted. Ignore it, and the crack walks into the field pavers.
- Staining that won’t come out around the outdoor cooking zone. Grease and oil penetrate unsealed joints fast. Once it’s in the paver, you’re not cleaning it out. You’re replacing the affected units or flipping them if they haven’t spalled.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Unilock kitchen remodel in Houston lands between $14,000 and $45,000 installed. A smaller galley-scope replacement, paver repair, or island re-surfacing starts closer to $9,000. A full outdoor kitchen rebuild with new substrate, drainage correction, counter surfaces, and appliance rough-ins pushes toward the top of the range. The number moves based on square footage, access, base excavation depth, and which Unilock series you’re matching.
Every Bradford Remodeling Co Houston bid includes the parts, labor, demolition, base material, and haul-off in one written number. No change orders added at the door. No re-pricing when the crew shows up. The written price is the price. Workmanship is covered by our 365-Day Done Right Promise: if anything fails in the first year, we return and correct it at no charge. Material warranties from Unilock or the aftermarket manufacturer run separately and we’ll document them for you on the final paperwork.
Straight scope, straight number. That’s the whole conversation.
DIY or Call Us?
You can safely check joint widths, look for standing water after a rain, and photograph any movement or cracking before calling. You cannot safely fix the substrate. Cutting out and compacting base material under a Unilock run requires a plate compactor, knowledge of Houston’s soil behavior, and a level of precision that’s easy to get wrong with a rental machine and a Saturday. A Unilock surface is only as good as what’s under it. If you re-set pavers on a bad base, you’ve paid for the job twice.
We’ve torn out DIY re-sets where the homeowner used sand instead of crushed stone base, skipped the geotextile, and wondered why the pavers sank again by fall. The correction costs more than a proper install would have the first time. If you’re not sure which category you’re in, call (940) 289-7658. We’ll walk you through what we’d check first, and we won’t send a crew until you’ve got a written price in hand.
FAQs
A properly installed Unilock kitchen surface in Houston should last 20 to 30 years for the pavers themselves, with joints and substrate holding for 10 to 15 years before any meaningful maintenance. Houston’s clay soil and humidity shorten the realistic substrate life compared to drier markets, but the surface units themselves hold up well. If your install is under five years old and already moving, the base was the problem from day one. Call (940) 289-7658 and we’ll assess it with a written report.
Yes, in most cases. Lifted, tilted, or spalled pavers can be removed, the base corrected, and the same units re-set. The deciding factor is whether the paver face has worn through to the aggregate or the internal structure is cracked. If the surface is intact, reuse is cheaper and blends better than new material. We assess this per unit and give you the reuse-versus-replace breakdown in writing before work starts. Call (940) 289-7658 for an exact quote. Estimates are free.
Most Houston Unilock kitchen remodels take two to four weeks from demolition to final joint sand and compaction. Complex outdoor kitchens with counters, islands, and appliance rough-ins can run six to eight weeks. Weather is the biggest variable, but the base work and paver setting move on schedule unless Houston gives us a week of steady rain. Call (940) 289-7658 and we’ll give you a timeline in writing alongside the price.
We stock common Unilock-compatible components in our Houston yard: joint sand, edge restraints, base materials, and a rotating inventory of the series most requested in this market. For specific Unilock series finishes or uncommon dimensions, we order directly and the lead time is typically seven to ten days. We’ll tell you what’s on the truck and what’s on order before you sign anything. Call (940) 289-7658 to check availability for your series.
Written by Curtis Lane, Owner, Bradford Remodeling Co Houston at Bradford Remodeling Co Houston, serving Houston and nearby areas.
