Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Houston?
Custom window and door orders in Houston typically run between $450 and $1,400 per opening for the product itself, with full installation bringing most projects to $4,500 – $15,000 depending on how many openings you’re replacing and what materials you choose. A standard 3-foot-by-5-foot custom double-hung window in a fiberglass or mid-grade vinyl frame lands around $600 – $900 installed, while a custom Therma-Tru entry door with sidelights runs $2,500 – $5,500. The spread is wide because “custom” covers everything from an off-size vinyl slider to a steel-and-glass pivot door built to architectural spec.
What matters more than the sticker price is what’s behind it. At Bradford Remodeling, every custom window and door order starts with a written price before any work begins. That number doesn’t move at the door. No re-quoting, no “we found rot” upcharge games. What’s on paper is what you pay. And the finished work carries the 365-Day Done Right Promise: if the install fails within a year, we come back and correct it at no charge.
Pricing reflects the Houston market as of 2026. Bradford Remodeling Co Houston offers free estimates – call (940) 289-7658.
Custom Window & Door Order Cost Breakdown (2026)
Here’s what we’re seeing across Houston in 2026, by opening type. These numbers include the product, standard installation, and haul-off of the old unit unless noted otherwise.
| Item | Low End (Houston, 2026) | High End (Houston, 2026) | What’s Included |
|---|---|---|---|
| Custom vinyl double-hung window (single opening, standard size) | $450 | $900 | Window, basic trim, interior caulk line |
| Custom fiberglass or wood-clad window (single opening) | $800 | $1,400 | Window, extended jamb, exterior trim |
| Custom sliding patio door (6 ft, 2-panel) | $1,800 | $3,800 | Door, hardware, threshold, weather seal |
| Custom French door (pair, exterior) | $2,200 | $4,800 | Doors, hinges, lock set, drip cap |
| Custom Therma-Tru entry door (single, no sidelights) | $1,800 | $3,500 | Slab, frame, hardware, weatherstrip |
| Custom Therma-Tru entry door with two sidelights | $3,000 | $5,500 | Full assembly, sill pan, interior/exterior trim |
| Custom impact-rated window (single opening, Houston coastal zone) | $900 | $1,600 | Impact glass, reinforced frame, code-compliant anchors |
| Full-house window replacement (10 – 14 openings) | $4,500 | $15,000 | All windows, trim, haul-off, disposal |
Those are real Houston numbers, pulled from jobs we’ve priced across the market in 2025 and early 2026. If a quote comes in well below the low end, ask what’s being left out. Cheap installs in Houston usually skip one of three things: proper flashing, a sill pan, or the haul-off fee. All three matter. A missing sill pan is how you get a rotted subfloor under a patio door six years later, and by then the installer’s number is disconnected.
The single biggest cost driver is the opening itself. If the rough opening was framed correctly and the existing trim is salvageable, installation is straightforward and fast. If the opening is out of square, rotted at the sill, or framed for a non-standard size, the labor hours climb. Custom orders also carry lead time. A made-to-spec Therma-Tru door from the factory runs 4 to 8 weeks in Houston right now. Vinyl windows from a Texas mill often run 2 to 4 weeks. If you need the opening weather-tight today, plan for a temporary seal and order the custom unit in parallel.
What Affects Custom Window & Door Order Pricing in Houston
- Material choice. Vinyl is the workhorse of the Houston market: it handles humidity without warping and lands at the bottom of the price range. Fiberglass costs 40 – 60% more but holds paint better on west-facing walls that take the afternoon sun. Wood-clad runs at the top end and demands resealing every few years in Houston’s climate.
- Impact rating. Homes east of I-45 and down toward Clear Lake and Galveston County fall under stricter wind-borne debris codes. Impact-rated glass adds $250 – $700 per opening. Buyers in Cypress or Katy usually don’t need it, but some HOA covenants in newer master-planned communities require it anyway.
- Rough opening condition. This is the variable nobody budgets for. In older Houston neighborhoods like Garden Oaks, Timbergrove, and Meyerland, we routinely find sill rot from decades of Gulf Coast humidity. Re-framing a rotted sill adds $200 – $600 per opening before the new unit even goes in.
- Access and story height. Second-story windows and doors on homes without a clear ground-level path require scaffolding or a lift. Add $150 – $400 per opening. Tight side yards in neighborhoods like The Heights make exterior work slower than in open-lot suburbs like Fulshear.
- Finish level. Builder-grade interior trim is cheap. Stain-grade trim, casing that matches existing 1920s bungalow profile, or paint-match on the exterior pushes material cost up $50 – $200 per opening.
- Disposal and permitting. Houston permits for window and door replacement run $50 – $200 depending on scope, and the city wants a final inspection on structural openings. Not every contractor pulls one. Bradford does, every time. It’s part of the written price, not a surprise line item.
Here’s the thing about Houston specifically: this market punishes shortcuts. Moisture is relentless. Summer attic heat cycles expand and contract every frame. Hurricane season tests every seal. A window ordered from a big-box store and installed by a day-labor crew will be cheaper on the front end. It will also fog, leak, or stick inside four years. You’re not buying a product. You’re buying the install method, the flashing detail, and the warranty standing behind both.
That’s the whole reason our custom window and door order process in Houston works the way it does. We order from documented manufacturers, spec the frame and trim in writing, and hand you a signed guarantee before we leave the job site. The Garrison Standard is exactly what it sounds like: a discipline, not a slogan. Everything on paper. Everything traceable.
How to Save on Custom Window & Door Order
Saving money on custom windows and doors doesn’t mean chasing the lowest bid. It means eliminating rework, avoiding change orders, and timing the project so you’re not paying rush fees. Here’s what actually works.
Order in the off-season
Houston’s peak window season runs March through October, matching the stretch of mild weather and the post-tax-refund booking rush. Mills in Texas and the Southeast run 6 to 10 weeks behind from spring through late summer. Order in November, December, or January and lead times shrink to 2 to 4 weeks on many lines. Some manufacturers run winter pricing incentives, too. If your timeline is flexible, a January order can save 5 to 10 percent on product cost.
Group the work
A single window replacement carries a fixed trip charge, permit fee, and disposal minimum. Five windows in one visit spreads those costs across five openings. Per-opening installed cost drops meaningfully when you do a whole side of the house or a full elevation at once. If you’re thinking about replacing windows over three years, run the math on doing it in one phase. You’ll also avoid paying for scaffolding or lift rental twice.
Keep standard sizes where you can
Custom doesn’t mean complicated. If a rough opening fits a standard produced size with a minor trim adjustment, the product cost drops significantly versus a true made-to-measure unit. During the estimate, we’ll tell you which openings can take a standard-size unit and which genuinely need custom fabrication. You’ll never hear “standard won’t work” on a standard opening from us. The written price shows the spec.
Don’t finance the trim
Interior casing, window stools, and apron trim are labor-intensive finishes. If the existing trim is in acceptable condition, a clean removal and reinstall saves $100 – $250 per opening versus new stain-grade trim. If you’re replacing the window anyway, this is the easiest place to cut without touching product or installation quality.
Get the written number first
This is more than a tip. It’s the difference between a quote and a guarantee. Every Bradford project starts with a written price. You’ll know the product spec, the install method, the permit cost, and the disposal fee before you commit. Estimates are free. Call (940) 289-7658 and we’ll send someone out to measure and price the job. No pressure, no door-knocker routine.
FAQs – Custom Window & Door Order Cost
How much does it cost to replace all windows in a Houston house?
For a typical 1,800 – 2,400 square foot Houston home with 10 to 14 openings, full window replacement runs $4,500 to $15,000 in 2026. The range depends on material spec, impact requirements, and the condition of the existing frames. A mid-grade vinyl job with new interior trim and proper flashing on a 12-opening house usually falls between $7,000 and $11,000. Call (940) 289-7658 for a written price on your exact opening count – estimates are free.
Is it cheaper to repair or replace a custom window?
If the failure is isolated to a fogged sealed-glass unit or a worn balance, repair runs $150 – $400 per window in Houston, which is cheaper than replacement. But if the frame is rotted, the sash is warped, or the rough opening is compromised, repair is a temporary patch on a structural problem. In Garden Oaks and West University, where homeowners are sitting on 1950s and 1960s originals, we typically recommend replacement once the frame itself is failing. The 365-Day Done Right Promise covers the work either way: if the repair doesn’t hold within the year, we return and correct it.
How much do custom Therma-Tru doors cost in Houston?
A custom Therma-Tru entry door with standard hardware runs $1,800 to $3,500 installed for a single door. Add two sidelights and the total runs $3,000 to $5,500. Therma-Tru is a documented brand in Bradford’s approved roster – the order is traceable to the factory, the hardware spec is in writing, and the finished install carries the full one-year written guarantee. Houston humidity doesn’t warp fiberglass, which is why we spec Therma-Tru for most entry replacements.
How long do custom windows take to order in Houston?
Vinyl custom windows from a Texas mill run 2 to 4 weeks from order to delivery in 2026. Fiberglass and wood-clad run 4 to 8 weeks. Therma-Tru door assemblies run 4 to 8 weeks depending on finish. If you’re ordering in March through August, add 2 to 3 weeks to those numbers. We give you the lead time in writing at the estimate, and we don’t schedule the install until the product is physically in our Houston warehouse with your job name on it.
Do you need a permit to replace windows and doors in Houston?
Yes, for structural openings. Houston requires a permit when the rough opening is altered, the header is touched, or the work changes the exterior envelope. Direct replacements in existing openings sometimes fall under minor work exemptions, but we pull the permit on every job where the city requires one. The permit cost is in the written price. What that buys you: a third-party city inspection confirming the flashing, anchoring, and seal work is code-compliant. Most contractors won’t bother. The Garrison Code says we do.
Why Bradford Remodeling for Custom Window & Door Orders in Houston
Led by Curtis Lane, Bradford Remodeling has been part of the Garrison Partners family since 2004. Each location is independently owned and operated, and every one is held to the same standard. The written price. The background-checked, uniformed technicians. The live person on the phone 24 hours a day, 7 days a week. The 365-Day Done Right Promise on every completed project.
We don’t ask you to take any of that on faith. It’s in writing before a single tool comes out. That’s The Garrison Standard. It’s the reason Houston homeowners who’ve been burned by no-shows and surprise invoices call us after the second bad bid. They’ve already learned what a handshake means when the trim is off and the opening is open to the July heat. They want the number on paper and the guarantee in hand.
Here’s what “squared away” looks like when we close a job: every old unit hauled off, every new unit flashed and sealed to spec, the permit finaled, the site swept, and a signed written guarantee in your hand. No punch list left for later. No “we’ll come back for that” unless it’s in writing with a date on it. You’ll watch a crew in uniform do the work the right way, and you’ll have Curtis’s name on the paperwork.
To get a free written estimate for your custom window and door order in Houston, call (940) 289-7658. A live person answers. Twenty-four hours a day.
Pricing reflects the Houston market as of 2026. Bradford Remodeling Co Houston offers free estimates – call (940) 289-7658.
What Our Customers Say
"Fixed price, written scope, and no surprise charges."
- Wes D."Great work. Countertop install slipped by a week, but they explained and kept us informed."
- Nora L."Straightforward people who do what they say. The crew did what the contract said and called before changing anything."
- Dianne W.
