Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Houston, TX | Bradford Remodeling Co Houston
We provide independent CWS cabinet and storage system service across Houston, from refacing to full kitchen remodels. The honest difference here is that we repair first and replace only when the cabinet box is genuinely shot. Houston’s humidity and expansive clay soil put CWS cabinetry through cycles most other markets never see, so we price the repair against the replacement and give you the straight number either way. Call (940) 289-7658 for a written estimate before any work starts.
Bradford Remodeling Co Houston is not manufacturer-affiliated or authorized by CWS. We’re an independent General Contractor in Houston with a decade-plus track record in this market. That independence means we recommend what the cabinet actually needs, not what a warranty flowchart says. For homeowners in Houston’s older neighborhoods and suburban tracts alike, that matters when a thermofoil door peels or a vanity box swells from slab moisture.
Why Houston Residents Choose Us for CWS Service
Curtis Lane, our owner, has been running crews in Houston for over a decade. He grew up in Los Angeles, picked up his first framing hammer before he could legally drive, and earned his carpentry and construction management credentials through Los Angeles Trade-Technical College before bringing that training to the Gulf Coast. He reads a scope of work the way other people read a box score, and he’s the first to tell you when a CWS cabinet is worth saving versus when it’s not.
That’s the kind of judgment Houston homeowners need. A CWS Designer Series kitchen in a Heights bungalow from the 1990s has very different structural realities than a CWS Value-Line vanity in a Sugar Land tract home on a slab, which is why our Kitchen Remodeling in Houston is tailored to each home’s specific conditions. We’ve worked on both, hundreds of times over. We know which hinge failures are just worn hardware and which are symptoms of a cabinet box that’s been fighting moisture for years.
We stock common aftermarket hinges, slides, and shelf pins locally so turnaround on most CWS hardware repairs doesn’t drag out. When the finish match is critical, we source genuine CWS replacement doors and drawer fronts. When it’s not, we use aftermarket parts that meet or exceed original specs. Either way, you get a written price before we pick up a tool.
Every job is covered by the 365-Day Done Right Promise. If the repair or remodel fails within a year, we come back and correct it at no charge. That’s not a handshake promise. It’s the Garrison Standard, and it’s in writing.
Styles & brands we work with
Common CWS Construction Problems We Solve in Houston
These are the failures we see most often in Houston homes, and the local conditions that drive them:
- Thermofoil peeling on CWS door and drawer fronts. Houston’s summer humidity routinely sits above 60% for weeks, especially in older homes without whole-house dehumidification. The thin vinyl film on thermofoil fronts starts lifting at the edges, then peels in sheets. We strip the old film and refinish with a moisture-resistant 2K polyurethane, or replace the fronts entirely if the MDF underneath has begun to swell.
- MDF core swelling and edge banding separation in base cabinets. Slab-on-grade construction means moisture wicks up through the concrete into cabinet bases. Add an under-sink leak that goes unnoticed for a few days and the MDF core of a CWS base cabinet swells, popping the edge banding and throwing drawers out of alignment. If the box is still square, we repair. If the core has turned to sponge, we replace.
- Soft-close hinge failure from expansion and contraction cycles. Houston’s heat and humidity swing hard between seasons. Cabinets in unconditioned garages and sunrooms go through daily expansion-contraction cycles that wear out soft-close mechanisms faster than the manufacturer’s lifespan estimates. We rebuild these with aftermarket Blum slides that hold up better to the Gulf Coast climate.
- Melamine shelf sagging in pantries and closets. Houston’s frequent power outages during hurricane season mean extended periods without air conditioning, which spikes indoor humidity. Melamine shelves absorb that moisture and sag under load. We replace with plywood-core shelves or add reinforcement where the span is too long for the material.
- Drawer alignment problems in pier-and-beam homes. Inside the Loop, many homes sit on pier-and-beam foundations that shift with the clay soil’s moisture swings. A CWS drawer that worked fine in January can start binding by August. We check the opening for square before we touch the hardware, because replacing a slide on an out-of-square box is wasted work.
CWS Service in Houston: What Local Conditions Mean for Your Equipment
Houston’s lack of zoning is the quiet factor behind a lot of CWS cabinet problems. Walk a block in the Heights and you’ll see a 1920s bungalow next to a redeveloped townhome next to a light industrial building. That patchwork means some homes sit closer to moisture sources, street runoff, and floodplain drainage than anything you’d find in a planned suburban development. When the city requires a pre-construction drainage plan for any lot addition over 500 square feet, you get a sense of how seriously water management shapes building decisions here.
For CWS cabinetry, that water reality translates into this: in the Heights and other pier-and-beam neighborhoods inside the Loop, many original 1990s CWS cabinet runs were built around floor deflections that have only gotten worse as the clay soil shifted. We routinely check for out-of-square openings before installing replacement drawers. A quarter-inch of deflection over a 30-inch opening means a new drawer will never seat right, no matter how good the slides are. That’s a step most contractors skip, and it’s why our repairs hold up when others don’t.
CWS Models & Products We Service in Houston
We work on the full CWS product range you’re likely to find in Houston homes. The CWS sales & service lines we see most often include the Designer Series Cabinets, Value-Line Cabinetry, Vanity Systems, and Closet & Storage Systems. Each line has its own failure profile. Designer Series boxes are usually solid plywood and worth saving. Value-Line boxes use more MDF and need a harder look before we recommend repair.
Our parts approach is simple. When the color and finish match matters, we order genuine CWS replacement doors and drawer fronts. When it doesn’t, we use aftermarket hinges, slides, and shelf pins that meet or exceed original specs. We keep the common hardware in local stock so a hinge rebuild doesn’t wait on a freight truck from a distribution center three states away.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Houston
Here are honest Houston market ranges for the CWS work we do most often:
| Service | Houston Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Cabinet Refacing (per linear foot) | $200 – $500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Full Kitchen Remodel | $14,000 – $45,000 |
What drives the final number is the condition of what you already have. A reface on a sound plywood box costs far less than a full replacement of water-damaged MDF. Your estimate is free and written, and the price doesn’t move once we hand it to you. Call (940) 289-7658 to schedule yours.
Serving Houston, TX - Our Local Coverage Area
We’re based in the Houston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Houston
It depends on how far the damage has gone. If the thermofoil is lifting at the edges but the MDF underneath is still smooth and dry, we strip the film and refinish with a moisture-resistant 2K polyurethane. That repair holds up well even in Houston summers. If the MDF has started to swell or delaminate, the door is done and we recommend replacement. Call (940) 289-7658 and we’ll tell you which one you’re looking at.
Most of the time, yes, if you catch it early. A pipe leak that gets addressed within a day or two usually leaves the cabinet box salvageable. The drawers stick because the MDF side panels swelled slightly, but that can often be corrected with sanding and resealing. If the box has been sitting wet for a week or more, especially on a slab foundation, the core may have absorbed enough moisture that replacement is the honest answer. We’ll inspect the box, check it for square, and give you a written recommendation.
We do this regularly. The first step is checking the existing run for square, because pier-and-beam deflection over decades means the original openings may no longer be true. Once we know what we’re working with, we match the door style and finish, either from the CWS catalog or with a refinish that matches your existing look. The goal is a match that doesn’t announce itself.
For a small galley kitchen in Houston, you’re looking at roughly $4,000 to $13,000 for cabinet installation depending on the number of boxes and whether you’re replacing just the fronts or the entire cabinet run. If you want thermofoil-free, humidity-resistant door options, that tends to push toward the middle or upper end of that range. Call (940) 289-7658 for a written estimate with a real number, not a guess.
During Houston’s summer, a water-damaged vanity can start growing mold within 48 to 72 hours if the humidity stays high and the air conditioning can’t keep up. We prioritize water-damage vanity replacements and can usually get the old one out and the new one roughed in within a day or two once we’ve assessed the scope. Call (940) 289-7658 as soon as you see the damage and we’ll get it scheduled.
Service Areas Near Houston
We serve the full Houston service area, including Jersey Village, Sugar Land, Stafford, Pasadena, and Atascocita. Our crews know CWS service in Jersey Village tract homes with slab foundations, and the CWS service in Sugar Land subdivisions where humidity and irrigation runoff put unique stress on cabinet bases. Wherever you are in the metro, the process is the same: written price first, straight scope, no surprises.
Book Your CWS Service in Houston Today
Straight scope, straight number, that’s the whole conversation. Call (940) 289-7658 and a live person picks up, 24/7. We’ll schedule your free written estimate and give you a real price before any work starts.
Written by Curtis Lane, Owner at Bradford Remodeling Co Houston, serving Houston since 2004.
